Monoprice Inc.
Monoprice Inc. 105359 RG6 18AWG 75Ohm 1.5ft Quad Shield CL2 Coaxial RF Cable Black
A 1.5 ft RG6 coaxial cable with quad shielding, 75 ohm impedance and CL2 rating for in-wall installation
- TypeOthers
- ColorBlack
- Length1.50 ft.
- Connector Number2
- CL2 rating allows safe in-wall installation
- 75 ohm impedance matches standard video equipment
- Quad shielding reduces signal interference
- 5 ft length suits short device connections
- 18 AWG centre conductor supports reliable transmission
1.5 ft RG6 Quad-Shield Coaxial Cable
This 1.5-foot RG6 coaxial cable uses an 18 AWG centre conductor and quad shielding to carry 75 ohm RF signals between two F-type connectors. The CL2 rating permits in-wall installation for residential video or broadband distribution. It suits installers who need a short, code-compliant patch lead.
Signal integrity over the installed run
Quad shielding suppresses external interference so the 75 ohm impedance remains stable along the full 1.5 ft length. The 18 AWG conductor limits attenuation on short runs carrying cable-TV, satellite or broadband frequencies. Performance is defined by the fixed length rather than by a burst-test figure.
Verify connector gender and routing space
Confirm both ends of your run accept standard F-type plugs before ordering. The 1.5 ft length offers minimal slack, so measure the exact path between devices or wall plates. Buyers who need longer in-wall runs or right-angle connectors should select a different cable.
Highlights
- CL2 rating allows safe in-wall installation
- 75 ohm impedance matches standard video equipment
- Quad shielding reduces signal interference
- 5 ft length suits short device connections
- 18 AWG centre conductor supports reliable transmission
Specifications
| Brand | Monoprice |
|---|---|
| Model | 105359 |
| Type | Others |
| Color | Black |
| Length | 1.50 ft. |
| Connector Number | 2 |
Questions about this item
Does the 75 ohm RG6 cable generate heat or draw power during continuous use?
The cable is passive and carries only RF signals, so it produces no measurable heat and draws no power when installed.
What connectors must my devices already have to use the two F-type ends on this 1.5 ft lead?
Both ends terminate in standard F-type male connectors, so each device needs a matching F-type female port.
Will this quad-shield CL2-rated cable work with older RG59 wall runs already in the house?
The cable meets 75 ohm RG6 specifications and CL2 fire rating; it can connect to legacy RG59 via an F-type barrel adapter, though shielding performance will be limited to the older run.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



