Monoprice Inc. 103035 100ft RG6 18AWG 75Ohm Quad Shield CL2 Coaxial RF Cable Black

100ft RG6 Quad Shield Coaxial Cable

This 99.97 ft RG6 coaxial cable uses an 18 AWG copper clad steel centre conductor and foam polyethylene dielectric for reliable signal transmission. It is rated at 75 Ohm impedance and sweep tested to 3.0 GHz across applicable frequencies. The quad shield construction helps protect against interference in demanding installations. Two F-type connectors are fitted for immediate use with antennas, cable television or satellite equipment.

Sustained Signal Integrity

The quad shield design maintains consistent attenuation performance over the full 99.97 ft length during continuous operation. Sweep testing to 3.0 GHz verifies that the 75 Ohm impedance remains stable across the 2200 MHz bandwidth rather than only at a single spot frequency. Foam polyethylene dielectric reduces long term signal loss compared with solid dielectric alternatives. This construction supports extended cable runs without the degradation seen in lighter shielding.

75 Ohm Coaxial Interface Limits

The F-type connector interface is standard for 75 Ohm RF distribution but cannot carry DC power or bidirectional data without additional hardware. Maximum usable frequency is defined by the 3.0 GHz sweep test rating and the 2200 MHz cable specification. Installers requiring plenum rated jacket or outdoor burial rating must select a different cable type as this model carries only CL2 rating. Runs exceeding the supplied length will need couplers that add insertion loss.