We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 16-pin 12VHPWR GPU extension cable with 90-degree angled connector and cable combs

Monoprice EZDPR230-11 12VHPWR GPU Extension Cable 90° White

SKU CH-1JP8-SNRSD

A 90-degree 12VHPWR extension cable with 16AWG wire, soldered joints and pre-fitted combs for tidy routing in compact builds

  • TypeCable Connectors
  • ColorBlack
  • Connector Number1
  • Connector DetailDVI to DVI
  • Terminal GenderMale to Male
  • SpecificationsShield Aesthetic, 90° Compact Design, Soldered Connections,
  • Sleek shield aesthetic enhances build appearance
  • 90° compact design enables routing in tight spaces
  • Soldered connections reduce detachment risk from bending
  • 16AWG tinned copper wire supports up to 600W power delivery
  • PCIe 5.1 12V-2x6 connector compatible with RTX 40/50 series cards

Extension cable for RTX 40 and 50 series GPUs

This 12VHPWR extension adds a 90 degree adapter between the graphics card and the PSU cable. It is built for builders who need clean routing in compact ITX or ATX cases. The 16 AWG tinned copper conductors and alloy copper terminals are rated for up to 600 W of GPU load. The white nylon sleeving and pre installed combs keep the run tidy.

Thermals and power delivery

The 16 AWG core wire provides efficient power transmission and good heat resistance under sustained load. Soldered connections at each joint reduce resistance and the risk of detachment caused by bending. The cable supports ATX 3.1 12V2x6 and PCIe 5.1 specifications for stable current delivery. It is not recommended for RTX 5090 because of extreme power spikes.

Bundled combs and sleeving

Pre installed cable combs align the individual wires so the extension routes cleanly without manual bundling. The soft nylon sleeve protects the conductors while staying flexible enough for tight bends behind the motherboard tray. A secure 100 percent seat with no gaps is required for safe operation. No software or additional accessories are included.

Highlights

  • Sleek shield aesthetic enhances build appearance
  • 90° compact design enables routing in tight spaces
  • Soldered connections reduce detachment risk from bending
  • 16AWG tinned copper wire supports up to 600W power delivery
  • PCIe 5.1 12V-2x6 connector compatible with RTX 40/50 series cards

Specifications

BrandMonoprice
ModelEZDPR230-11
TypeCable Connectors
ColorBlack
Connector Number1
Connector DetailDVI to DVI
Terminal GenderMale to Male
SpecificationsShield Aesthetic, 90° Compact Design, Soldered Connections, 12 volts_of_direct_current, 16-pin (12+4) 12vhpwr, 16, White, EZDPR230-11
FeaturesShield Aesthetic, 90° Compact Design, Soldered Connections

Questions about this item

How do I route the 90° 12VHPWR connector into a tight ITX case without stressing the soldered joints?

Seat the 16-pin plug fully until the latch clicks, then use the pre-installed combs to guide the 16AWG nylon-sleeved wires so the 90° bend clears the side panel without pulling on the terminals.

Will the 16AWG tinned-copper wires and alloy terminals need periodic re-seating or replacement?

The soldered connections and shield aesthetic sleeve are designed for the life of the build; no scheduled re-seating or wire replacement is required.

At what sustained load does the 600 W rating become a limiting factor for an RTX 4090?

The cable is rated for 600 W continuous delivery; sustained draws above that level — such as extreme power spikes on an RTX 5090 — are where the limit appears first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.