We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 active repeater cable 49 ft with Type-A male to female connectors

Monoprice Inc.

Monoprice 7532 USB 2.0 Active Repeater Cable 49 ft

SKU CH-FE02-QTQD9 MPN 7532

Extends USB 2.0 connections to 49 ft with active signal boosting for cameras, printers, Kinect and PS3 Move

  • ColorBlack
  • Cable Length49 ft.
  • Weight1.35
  • Extends USB 2.0 connections to 49 ft without signal loss
  • Active repeater electronics boost signal for reliable performance
  • Bus-powered design needs no external adapter or drivers
  • Compatible with Xbox Kinect USB version and PS3 Move
  • Works with Windows, Mac OS 9.0+, and Linux systems

USB 2.0 Active Extension for Long Runs

This 49 ft active repeater cable extends USB 2.0 connections well beyond the standard 16.4 ft limit. It uses built-in electronics to boost the signal for reliable data transfer over the full length. The bus-powered design requires no external adapter, so it works as a simple plug-and-play link for cameras, printers, webcams, keyboards and mice. It is compatible with Windows 98 through 7, Mac OS 9.0 or higher and Linux.

Signal Integrity Over Full Length

The active circuitry regenerates the USB signal continuously along the 28/24 AWG conductors, preventing the attenuation that causes drop-outs on passive cables at this distance. Because it draws power from the host port, performance stays consistent without a separate power supply. The repeater maintains USB 2.0 throughput for typical peripherals, though total bus current remains limited to what the host controller provides. No driver installation is needed on supported operating systems.

Kinect and PS3 Move Compatibility Note

This cable supports the USB version of the Xbox Kinect only; it will not work with the proprietary Kinect connector, which requires a different part. The Kinect draws more current than a standard USB port can supply, so an additional powered hub may be necessary to avoid damage or instability. For PlayStation 3 Move, the cable extends the Eye camera connection within the same USB 2.0 limits. Buyers needing proprietary Kinect connectivity or higher bus power should look elsewhere.

Highlights

  • Extends USB 2.0 connections to 49 ft without signal loss
  • Active repeater electronics boost signal for reliable performance
  • Bus-powered design needs no external adapter or drivers
  • Compatible with Xbox Kinect USB version and PS3 Move
  • Works with Windows, Mac OS 9.0+, and Linux systems

Specifications

BrandMonoprice
Series107532
Model107532
Part Number107532
ColorBlack
Cable Length49 ft.
Weight1.35
Shipping weight0.61 kg
Package size211 × 193 × 58 mm

Questions about this item

Does the active repeater draw noticeable power or generate heat when left connected all day?

The cable is bus-powered and uses active electronics to boost the USB signal, so it draws a small amount of power from the host port but does not require an external supply.

What must my computer already have for this 49 ft extension to work?

A standard USB Type-A port and a supported OS such as Windows 98, 2000, XP, Vista, 7, Mac OS 9.0 or higher, or Linux.

Will this 49 ft active cable work reliably with an older USB 2.0 webcam or printer I already own?

Yes, it is a plug-and-play USB 2.0 extender compatible with cameras, printers, webcams, keyboards, mice, Xbox Kinect and PS3 Move.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.