We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1/4 inch TRS male plug splitting to two color-coded 1/4 inch TS male plugs, 10 ft cable

Monoprice Inc.

Monoprice 601053 1/4" TRS to dual 1/4" TS insert cable 10 ft black

SKU CH-BC8H-2GBE1

A 10 ft insert cable with a 1/4" TRS male plug and two colour-coded 1/4" TS male plugs for effects-loop or stereo-split applications

  • TypeOthers
  • ColorBlack
  • Length3.048
  • Connector Number2
  • Terminal GenderMale to Male
  • FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
  • Connect external effects processors to mixing boards with a 10 ft insert cable
  • 26 AWG conductors and copper braid shielding reduce signal interference
  • TRS to dual TS design splits stereo or combines mono signals
  • Color-coded gray and red TS plugs simplify channel identification
  • Knurled connector grips allow easy insertion and removal

Monoprice 601053 1/4" TRS Insert Cable

This 10 ft insert cable connects a mixing board channel insert to an external effects processor. A single 1/4" TRS male plug splits into two color-coded 1/4" TS male plugs for send and return paths. It suits studio engineers and live sound operators who need a reliable effects loop.

Passive cable with copper braid shielding

The cable uses 26 AWG conductors wrapped in copper braid shielding to reduce interference. As a passive analogue interconnect it draws no power and adds no noise of its own. Knurled grips on the TS plugs make insertion and removal easy during session changes.

Fits standard 1/4" insert jacks and unbalanced gear

The TRS end plugs into a mixer insert jack while the gray and red TS ends connect to processor inputs and outputs. The same cable can split an unbalanced stereo source into two mono lines or combine two mono sources into one stereo feed. No external power or active electronics are required.

Highlights

  • Connect external effects processors to mixing boards with a 10 ft insert cable
  • 26 AWG conductors and copper braid shielding reduce signal interference
  • TRS to dual TS design splits stereo or combines mono signals
  • Color-coded gray and red TS plugs simplify channel identification
  • Knurled connector grips allow easy insertion and removal

Specifications

BrandMonoprice
Model601053
TypeOthers
ColorBlack
Length3.048
Connector Number2
Terminal GenderMale to Male
FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.

Questions about this item

How do I connect the 1/4" TRS plug and the two colour-coded TS plugs to a mixer insert?

Insert the TRS plug into the mixer's insert jack; the tip sends the signal out and the ring returns it. The grey TS plug carries the send and the red TS plug carries the return.

What part of this cable is most likely to need replacement after heavy use?

The 26 AWG conductors and copper braid shielding are built for durability, but the 1/4" TS and TRS plugs can wear from repeated insertion and removal.

What length limit affects signal quality on long runs with this insert cable?

At 10 feet the 26 AWG conductors keep resistance low enough for typical studio use; longer runs would increase attenuation and noise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.