We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled 16 AWG speaker wire on spool, 100 ft length, clear jacket with copper conductors visible

Monoprice Inc.

Monoprice 2823 16AWG 100 ft coaxial rf cable

SKU CH-GBTB-2A405

A 100 ft 16AWG coaxial RF cable built with 99.5% pure oxygen-free copper for reliable signal transmission

  • Length100 ft.
  • Connector Number1
  • 100 ft length suits whole-home speaker runs
  • 16 AWG gauge handles typical amplifier currents
  • 5 % oxygen-free copper reduces signal loss
  • CL2 rating allows in-wall installation
  • 2-conductor design simplifies stereo hookup

100-foot 16AWG speaker cable

The Monoprice 2823 is a 100 ft 16AWG cable built with 99.5% pure oxygen-free copper conductors. It is designed for stereo or home-theatre installations that require long, uninterrupted runs between an amplifier and passive speakers. The two-conductor layout supports standard left and right channel wiring.

CL2-rated in-wall construction

The cable carries a CL2 rating, allowing it to be routed inside walls or ceilings to meet building-code requirements for fire safety. Oxygen-free copper reduces resistance over the 100-foot length, helping to preserve signal integrity without excessive voltage drop. The flexible jacket eases pulling through studs and around corners during installation.

Bare-copper ends ready for termination

Both ends are supplied as bare copper with no factory-fitted connectors, so you can terminate them with banana plugs, spade lugs or direct binding-post connections to match your equipment. The single-conductor count means each cable run carries one channel; a second cable is needed for the return path in a typical stereo pair. No additional software or accessories are included.

Highlights

  • 100 ft length suits whole-home speaker runs
  • 16 AWG gauge handles typical amplifier currents
  • 5 % oxygen-free copper reduces signal loss
  • CL2 rating allows in-wall installation
  • 2-conductor design simplifies stereo hookup

Specifications

BrandMonoprice
Model2823
Length100 ft.
Connector Number1

Questions about this item

How do I install the 16AWG 100 ft cable and what step is commonly missed?

Strip each end cleanly, then tighten the F-type connector fully by hand before using a wrench for the final quarter-turn; skipping the hand-tight start often cross-threads the nut.

What maintenance or replacement will the 99.5% oxygen-free copper cable need later?

Inspect the jacket annually for UV cracking or kinks; if the braid shows corrosion or the centre conductor feels loose in the F-pin, replace the run.

What limit appears first on the 2823 cable during sustained high-power audio use?

The 16 AWG gauge sets the practical ceiling — voltage drop over 100 ft becomes audible before the oxygen-free copper itself degrades.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.