We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat Ethernet cable with slim RJ45 plugs, 10 ft length

Monoprice Inc.

Monoprice 145429 Cat6A STP network ethernet cable 10 ft black 26AWG non-booted

SKU CH-5KH7-SV00R

Shielded Cat6A patch cable with 26AWG bare copper conductors, 500MHz bandwidth and non-booted RJ45 plugs for dense installations

  • TypeNetworking Patch Cables
  • FeaturesShielded Twisted Pair (STP) Category 6A Ethernet cable
  • Supports 10 Gbps speeds with 500 MHz bandwidth
  • 26 AWG bare copper conductors ensure reliable signal integrity
  • Gold-plated RJ45 contacts resist corrosion for lasting performance
  • Shielded twisted pair design reduces electromagnetic interference
  • Non-booted connector saves space in high-density patch panels

Shielded Cat6A patch cable for dense racks

This 10‑foot Monoprice 145429 cable uses shielded twisted‑pair construction and pure bare copper conductors to support 500 MHz bandwidth and 10 Gbps Ethernet runs. The non‑booted RJ45 plugs reduce depth at each port, helping keep high‑density patch panels and server cabinets tidy.

Gold‑plated contacts and non‑booted plugs

Fifty‑micron gold plating on the copper pins resists corrosion and maintains low‑resistance connections over repeated insertions. Removing the protective boot shortens the connector body, so cables sit closer to the panel and airflow is less restricted in tightly packed racks.

Ten‑foot reach with 26 AWG flexibility

At 10 feet the cable comfortably spans rack‑to‑rack or switch‑to‑server links while the 26 AWG stranded conductors stay pliable for tight bends. Shielding handles alien crosstalk up to the rated 500 MHz, but runs longer than the specification allows will exceed the guaranteed performance envelope.

Highlights

  • Supports 10 Gbps speeds with 500 MHz bandwidth
  • 26 AWG bare copper conductors ensure reliable signal integrity
  • Gold-plated RJ45 contacts resist corrosion for lasting performance
  • Shielded twisted pair design reduces electromagnetic interference
  • Non-booted connector saves space in high-density patch panels

Specifications

BrandMonoprice
Model145429
TypeNetworking Patch Cables
FeaturesShielded Twisted Pair (STP) Category 6A Ethernet cable

Questions about this item

Will the 26AWG stranded bare copper conductors need replacement after repeated patch-panel moves?

The 26AWG stranded pure bare copper conductors are built for flexible routing; they do not require scheduled replacement unless physical damage occurs during re-termination or tight bends.

What limits 10 Gbps throughput first on a 10 ft run at 500 MHz bandwidth?

At 10 feet the 500 MHz bandwidth and shielded twisted pair construction keep insertion loss well within Cat6A limits, so the practical ceiling is the connected 10 GbE port rather than the cable itself.

Does the non-booted STP jacket run hotter or draw more power than a booted cable in a rack?

The cable is passive — it draws no power and generates no measurable heat; the non-booted design only reduces physical depth in high-density patching.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.