We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6A shielded ethernet cable, non-booted RJ45 plugs, three feet long

Monoprice Inc.

Monoprice 145426 Cat6A STP network ethernet cable 3 ft 26AWG 500MHz non-booted black

SKU CH-4WGT-119X5

Shielded Cat6A patch cable, 3 ft, 26AWG bare copper, 500MHz bandwidth, gold-plated RJ45, non-booted for high-density installs

  • TypeNetworking Patch Cables
  • FeaturesShielded Twisted Pair (STP) Category 6A Ethernet cable
  • Shielded Twisted Pair construction reduces crosstalk in high-density racks
  • 26AWG stranded bare copper conductors maintain signal integrity over short runs
  • 500 MHz bandwidth supports 10 Gbps Ethernet links
  • Gold-plated RJ45 contacts resist corrosion for reliable long-term connections
  • Non-booted design saves space in crowded patch panels

High-density Cat6A patch cable

This Monoprice 145426 cable is a shielded twisted pair Category 6A Ethernet patch cord built for high-density networking environments. It uses 26AWG stranded bare copper conductors and 50µm gold-plated RJ45 connectors to support 10G speeds over short runs. The non-booted design reduces the connector footprint for tighter patch-panel spacing.

Check connector clearance and shield grounding

Verify that your patch panel or switch ports have enough rear clearance for the non-booted RJ45 plugs, which lack the protective hood found on booted cables. Confirm that your rack or cabinet grounding scheme accommodates the STP shield drain wire so the shielding remains effective. Ensure the 3-foot length reaches between your specific devices without tension.

Low heat and silent passive operation

As a passive copper cable it draws no power and generates no measurable heat during normal 10G data transfer. There are no fans or moving parts, so operation is completely silent in server rooms or office racks. The 500MHz bandwidth rating supports full Category 6A performance without thermal throttling or signal degradation over the 3-foot distance.

Highlights

  • Shielded Twisted Pair construction reduces crosstalk in high-density racks
  • 26AWG stranded bare copper conductors maintain signal integrity over short runs
  • 500 MHz bandwidth supports 10 Gbps Ethernet links
  • Gold-plated RJ45 contacts resist corrosion for reliable long-term connections
  • Non-booted design saves space in crowded patch panels

Specifications

BrandMonoprice
Model145426
TypeNetworking Patch Cables
FeaturesShielded Twisted Pair (STP) Category 6A Ethernet cable

Questions about this item

Does the Monoprice 145426 cable come with any connectors pre-attached or do I need to buy RJ45 plugs separately?

The cable ships with gold-plated RJ45 connectors already crimped on both ends so no separate plugs are required.

The listing shows only a 3-foot length; is that the only version available under model 145426?

Model 145426 is offered in a single 3-foot length; other lengths would carry different model numbers.

What real-world speed can I expect from the 500 MHz rating on a 10 GbE link?

The 500 MHz bandwidth supports full 10 Gbps throughput over the 3-foot run when paired with compliant 10 GbE hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.