We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6A ethernet cable one hundred feet long with shielded RJ45 connectors

Monoprice Inc.

Monoprice 144678 Cat6A PoE++ network ethernet cable 100 ft black

SKU CH-B5DX-H48X6

A 100 ft Cat6A patch cable that delivers 10 Gbps data and 90 W PoE++ power through shielded RJ45 connectors and 22 AWG bare copper conductors

  • TypeNetworking Patch Cables
  • ColorBlack
  • FeaturesPoE++ Compliant: Meets PoE standard (IEEE 802.3bt), carry da
  • Delivers 90W power plus data over one cable via IEEE 802.3bt PoE++
  • 10G speeds validated by DSX-8000 Fluke test at 500MHz
  • Shielded RJ45 connectors with 50µ gold plating cut EMI/RFI and improve heat dissipation
  • Pure bare copper 22AWG conductors lower resistance and reduce heat buildup
  • Supports full PoE power delivery up to 262ft for remote device placement

100-foot Cat6A PoE++ cable for powered devices

This 100-foot Cat6A patch cable delivers both data and up to 90 watts of power over a single run. It targets installers connecting PoE cameras, wireless access points, VoIP phones or lighting where separate power wiring is impractical. The 22 AWG pure bare copper conductors keep resistance low across the full length.

IEEE 802.3bt compliance

The cable meets the IEEE 802.3bt PoE++ standard, guaranteeing 90 W delivery to the powered device even at distance. Every unit passes a DSX-8000 Fluke patch test at 500 MHz, confirming headroom for 10 Gbps transmission. Shielded RJ45 plugs with 50 µ gold contacts suppress EMI and resist corrosion.

UTP construction with shielded connectors

Unshielded twisted-pair wiring keeps the cable flexible for pulls through conduit or ceiling voids, while the shielded RJ45 housings handle grounding at the patch panel or switch. The design supports runs up to 262 feet without signal or power degradation. Buyers needing outdoor-rated jackets or pre-terminated fiber should look elsewhere.

Highlights

  • Delivers 90W power plus data over one cable via IEEE 802.3bt PoE++
  • 10G speeds validated by DSX-8000 Fluke test at 500MHz
  • Shielded RJ45 connectors with 50µ gold plating cut EMI/RFI and improve heat dissipation
  • Pure bare copper 22AWG conductors lower resistance and reduce heat buildup
  • Supports full PoE power delivery up to 262ft for remote device placement

Specifications

BrandMonoprice
Model144678
TypeNetworking Patch Cables
ColorBlack
FeaturesPoE++ Compliant: Meets PoE standard (IEEE 802.3bt), carry data and 90W of electricity via single cable to devices to maximize the capabilities, efficiency, saving installation time and costs.

Questions about this item

What does the 500 MHz Fluke test result mean for actual 10 Gbps traffic?

The DSX‑8000 Fluke patch test at 500 MHz verifies the cable meets Cat6A channel limits, so 10 Gbps Ethernet runs error‑free up to the rated distance.

Which PoE standard does the IEEE 802.3bt label cover and what power does it deliver?

IEEE 802.3bt is the PoE++ standard that supplies up to 90 W to the powered device over the same four pairs.

Will the shielded RJ45 plugs fit a standard keystone jack or patch panel port?

Yes, the 50 µm gold‑plated shielded RJ45 connectors use the standard 8P8C footprint and snap into any Cat6A keystone or panel port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.