We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6A ethernet cable twenty five feet long with shielded RJ45 connectors

Monoprice Inc.

Monoprice 144676 Cat6A PoE++ network ethernet cable 25 ft black 22AWG 500MHz 90W

SKU CH-SYCW-2VRRG

A 25 ft Cat6A patch cable with 22AWG conductors and shielded RJ45 connectors delivers 10 Gbps data and up to 90 W PoE++ power over a single run

  • TypeNetworking Patch Cables
  • ColorBlack
  • FeaturesPoE++ Compliant: Meets PoE standard (IEEE 802.3bt), carry da
  • 10 Gbps data and 90 W power over one cable
  • Pure bare copper 22 AWG conductors cut resistance and heat
  • DSX‑8000 Fluke tested at 500 MHz for verified 10G performance
  • Shielded RJ45 plugs with 50 µ gold resist EMI and wear
  • IEEE 802.3bt compliant to 262 ft for full‑distance PoE++ delivery

25-foot Cat6A PoE++ cable for powered devices

This 25-foot Cat6A patch cable delivers 10G data rates and up to 90 watts of power over a single run. It targets installers connecting PoE cameras, VoIP phones, wireless access points or lighting fixtures. Pure bare copper conductors and 22AWG gauge keep resistance low across the full length.

Thermals, noise and power draw in normal use

The 22AWG copper cores generate less heat while carrying 90 watts, and shielded RJ45 plugs further dissipate warmth. No active cooling is involved, so the cable adds zero acoustic noise. Power loss stays minimal thanks to the low-resistance design validated at 500MHz.

Build fit: shielded connectors

Shielded RJ45 ends with 50-micron gold plating resist EMI/RFI in dense racks and lock securely with an interlock tab. The cable meets IEEE 802.3bt compliance out to 262 feet, freeing installers from mid-span injectors. Fluke DSX-8000 testing at 500MHz confirms headroom for 10G throughput.

Highlights

  • 10 Gbps data and 90 W power over one cable
  • Pure bare copper 22 AWG conductors cut resistance and heat
  • DSX‑8000 Fluke tested at 500 MHz for verified 10G performance
  • Shielded RJ45 plugs with 50 µ gold resist EMI and wear
  • IEEE 802.3bt compliant to 262 ft for full‑distance PoE++ delivery

Specifications

BrandMonoprice
Model144676
TypeNetworking Patch Cables
ColorBlack
FeaturesPoE++ Compliant: Meets PoE standard (IEEE 802.3bt), carry data and 90W of electricity via single cable to devices to maximize the capabilities, efficiency, saving installation time and costs.

Questions about this item

How do I connect the shielded RJ45 connectors on this Cat6A PoE++ cable without damaging the interlock?

Align the tab with the port, push straight in until the interlock clicks, then pull gently to confirm it is seated; the 50 µm gold-plated strain relief protects the 22 AWG conductors during insertion.

Will the 22 AWG pure bare copper conductors need replacement after extended PoE++ use at 90 W?

The 22 AWG pure bare copper design reduces resistance and heat, so the conductors themselves do not wear out; only the RJ45 connectors may need replacement if the interlock or gold plating is physically damaged.

At what cable length does voltage drop first limit 90 W PoE++ delivery on this 25 ft run?

The cable is rated for full 90 W delivery up to 262 ft, so a 25 ft run stays well within the distance limit; the first practical limit is the connected device's own power budget, not the cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.