We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat6A ethernet cable with ultra-short snagless RJ45 connectors, 7 ft length

Monoprice Inc.

Monoprice 144649 Cat6A network ethernet cable 7 ft black 24AWG 500MHz CMR UTP snagless Micro SlimRun

SKU CH-QTTR-E3PZ4

A 7 ft Cat6A patch cable with 24 AWG pure bare copper conductors, 500 MHz bandwidth and CMR riser rating for in-wall use

  • TypeNetworking Patch Cables
  • Length7
  • FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100
  • Component-level TIA 568.2-D compliance ensures reliable 10 Gbps performance
  • CMR riser rating allows safe in-wall and between-floor installation
  • Ultra-short snagless boot reduces bend radius for tight spaces
  • 500 MHz DSX-8000 verified bandwidth supports high-density server links
  • 24 AWG pure bare copper conductors meet IEEE 802 10 Gb Ethernet standard

High-density patch cable for 10 Gb networks

The Monoprice 144649 Cat6A patch cable delivers component-level performance tested to 500 MHz with 24 AWG pure bare copper conductors. Its CMR riser rating allows safe in-wall installation between floors in commercial buildings. The ultra-short snagless boot reduces the bend radius for tight server racks and high-density patch panels. It supports 10 Gb Ethernet over UTP per the IEEE 802 standard.

Upgrade from channel-rated Cat6a or Cat6 links

This component-level cable replaces patch cords that only meet channel specifications, removing a common bottleneck in 10 Gb runs. The jump is worth it when Fluke DSX-8000 certification at 500 MHz is required for warranty or audit compliance. It also solves congestion where standard boots block adjacent ports in dense switches. Existing Cat6 infrastructure below 1 Gb will not see a speed increase from this cable alone.

Suits data centres, server rooms

Installers who need verified component-level margins, riser-rated jackets and ultra-short boots for shallow cabinets will benefit. Buyers who only need short desktop links at 1 Gb or who require outdoor, direct-burial or plenum-rated jackets should look at something else. The 7-foot length is fixed and cannot be field-terminated to custom distances.

Highlights

  • Component-level TIA 568.2-D compliance ensures reliable 10 Gbps performance
  • CMR riser rating allows safe in-wall and between-floor installation
  • Ultra-short snagless boot reduces bend radius for tight spaces
  • 500 MHz DSX-8000 verified bandwidth supports high-density server links
  • 24 AWG pure bare copper conductors meet IEEE 802 10 Gb Ethernet standard

Specifications

BrandMonoprice
Model144649
TypeNetworking Patch Cables
Length7
FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100% transmission tested to component level.

Questions about this item

What clearance does the ultra-short boot need behind a patch panel?

The ultra-short boot on this 144649 cable reduces the installed bend radius, so it fits in limited-depth racks where standard boots would bottom out.

Which step do installers skip when terminating the 24 AWG stranded conductors?

They often forget to seat each conductor fully into the RJ45 contact before crimping; the factory-terminated plug avoids that error entirely.

When should this CMR-rated run be replaced in a 10 Gbps backbone?

Replace it if Fluke DSX-8000 testing shows insertion-loss or NEXT margins dropping below the TIA 568.2-D component-level limits at 500 MHz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.