We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6A patch cable, 5 feet, slim snagless connectors

Monoprice Inc.

Monoprice 144648 Cat6A Patch Cable 5ft Blue 24AWG 500MHz

SKU CH-F40D-Y1A0Y

A 5 ft Cat6A patch cable with 24 AWG pure copper conductors, tested to 500 MHz and compliant with TIA 568.2-D and ISO 11801 for 10 Gb Ethernet

  • TypeNetworking Patch Cables
  • FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100
  • Component-level TIA 568.2-D and ISO 11801 compliance ensures reliable 10 Gb Ethernet performance
  • CMR riser-rated bare copper conductors allow safe in-wall installation between floors
  • Ultra-short snagless boot design reduces bend radius for tight high-density server racks
  • 50 µm gold-plated RJ45 contacts resist corrosion for long-term signal integrity
  • 100 % factory transmission tested at 500 MHz validates component-level specification adherence

High-density Cat6A patch cable

The Monoprice 144648 Cat6A patch cable measures 5 ft and uses 24 AWG UTP stranded pure bare copper conductors. It is component-level compliant with TIA 568.2-D and ISO 11801, and 100 % transmission tested to component level. The CMR riser rating allows installation in walls, risers and between floors of commercial buildings.

Ultra-short boot and gold contacts

An ultra-short snagless boot reduces the installed bend radius, easing routing in limited-depth cabinets and high-density racks. The 50 µ gold-plated RJ45 plugs include strain relief to maintain long-term signal integrity. These physical features directly support dense patch-panel environments where space is constrained.

Suited for 10 GbE server rooms

This cable supports the IEEE 802 standard for 10 Gb Ethernet over UTP and passes the DSX-8000 Fluke patch test at 500 MHz. It fits data centres, server rooms and in-wall runs needing component-level verification. Buyers needing longer reach, outdoor rating or fibre media should look at other solutions.

Highlights

  • Component-level TIA 568.2-D and ISO 11801 compliance ensures reliable 10 Gb Ethernet performance
  • CMR riser-rated bare copper conductors allow safe in-wall installation between floors
  • Ultra-short snagless boot design reduces bend radius for tight high-density server racks
  • 50 µm gold-plated RJ45 contacts resist corrosion for long-term signal integrity
  • 100 % factory transmission tested at 500 MHz validates component-level specification adherence

Specifications

BrandMonoprice
Model144648
TypeNetworking Patch Cables
FeaturesComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100% transmission tested to component level.

Questions about this item

Will the 24 AWG stranded copper conductors need replacement if the cable is bent repeatedly in a tight rack?

The ultra-short boot design reduces the installed bend radius, and the stranded 24 AWG pure bare copper conductors are built for repeated flexing in high-density installations.

What is the highest frequency the cable is tested to handle continuously?

Each cable is 100 % transmission tested to component level at 500 MHz, meeting TIA 568.2-D and ISO 11801 limits for sustained 10 Gb Ethernet traffic.

Does the CMR riser jacket add noticeable heat or stiffness when the cable runs all day in a server room?

The CMR-rated jacket is flame-retardant for in-wall use but remains flexible; the micro SlimRun profile keeps airflow unrestricted and adds no measurable heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.