Monoprice 144499 Cat6A SlimRun Patch Cable 1ft Blue 30AWG

SlimRun Cat6A 1ft patch cable

This one-foot Cat6A patch cable uses 30AWG conductors to deliver 10-Gigabit Ethernet performance in a diameter roughly half that of standard 23AWG cable. The slim profile makes it practical for dense patch panels and tight routing paths where bulkier cables would not fit. Pure bare copper construction meets UL 444 and TIA-568-C.2 requirements for permanent installations. Snagless narrow boots simplify insertion and removal in crowded racks.

Sustained 10G throughput in dense bundles

Because the cable is built with 100% pure bare copper rather than copper-clad aluminium, it maintains the full 10-Gigabit signal quality over its one-foot length even when packed alongside dozens of other runs. The reduced diameter improves airflow around active equipment, helping to keep operating temperatures stable during continuous high-bandwidth transfers. Backward compatibility ensures the same link negotiates down to Gigabit or Fast Ethernet without errors when connected to older ports.

Cat6A channel limits and connector constraints

The Cat6A standard defines a maximum 100-metre channel for 10-Gigabit operation, so this one-foot jumper consumes only a tiny fraction of the total link budget. Its RJ45 plugs follow the standard pinout and will mate with any compliant jack, but the narrow boot may not latch securely in recessed ports designed for larger mouldings. Installers should verify that the 30AWG conductor gauge is accepted by the specific punch-down blocks or keystones used in the permanent link.