We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2ft power cord with right-angle C13 connector and straight NEMA 5-15P plug

Monoprice Inc.

Monoprice 142084 Power Extension Cord 2ft NEMA 5-15P to Right Angle C13 16AWG 13A 125V Black

SKU CH-NMRR-EMV0D

A 2-foot power extension cord with a right-angle C13 connector for tight spaces behind PCs, monitors, scanners and printers

  • TypeOthers
  • Length0.6096
  • Connector Number2
  • FeaturesWorks with most PCs, monitors, scanners, and printers.
  • Right-angle C13 connector fits tight spaces behind equipment
  • 16 AWG conductors rated 13 A at 125 V for safe power delivery
  • Grounded NEMA 5-15P plug connects to standard US wall outlets
  • 6096 m length reduces cable clutter on short runs
  • Compatible with PCs, monitors, scanners and printers using C14 inlets

Right-Angle C13 Power Cord

This two-foot extension cord carries a grounded NEMA 5-15P plug on one end and a 90-degree IEC 60320 C13 connector on the other. The right-angle design lets the cable sit flush against equipment in tight spaces behind desks or racks. It is rated for 13 amps at 125 volts using 16 AWG SJT conductors.

Ideal for Crowded Rear Panels

The angled C13 suits PCs, monitors, scanners and printers where a straight connector would press against a wall or adjacent ports. Builders who need a longer run, a straight C13 entry, a higher current rating or a non-NEMA plug should choose a different cord.

90-Degree C13 Connector

The single specification that decides fit is the right-angle IEC 60320 C13 end; it only mates with a standard C14 inlet and cannot be used where a straight connector or a different IEC shape is required.

Highlights

  • Right-angle C13 connector fits tight spaces behind equipment
  • 16 AWG conductors rated 13 A at 125 V for safe power delivery
  • Grounded NEMA 5-15P plug connects to standard US wall outlets
  • 6096 m length reduces cable clutter on short runs
  • Compatible with PCs, monitors, scanners and printers using C14 inlets

Specifications

BrandMonoprice
Model142084
TypeOthers
Length0.6096
Connector Number2
FeaturesWorks with most PCs, monitors, scanners, and printers.

Questions about this item

How can I confirm the right-angle C13 connector is seated correctly after plugging it in?

The 90 degree C13 connector should lock firmly onto the male C14 inlet of your PC, monitor, scanner or printer with no visible gap, and the device powers on normally.

What connectors are included and is anything else required to use this cord?

The cord has a grounded NEMA 5-15P plug on one end and an IEC 60320 C13 right-angle connector on the other; no extra parts are needed if your device has a C14 inlet and you have a standard US AC outlet.

Which version should I choose for a typical desktop PC or monitor?

Model 142084 is a 2 foot, 16 AWG cord rated 13 A at 125 V (1625 W) with a 90 degree C13 end, matching the standard IEC 60320 C14 inlet found on most PCs, monitors, scanners and printers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.