We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black STP Cat6A patch cable 2 ft with RJ45 connectors

Monoprice Inc.

Monoprice 124327 Cat6A Ethernet Patch Cable 2 ft Black STP 550MHz 26AWG

SKU CH-HTKT-2M29R

Shielded Cat6A patch cable with pure bare copper conductors rated for 550 MHz bandwidth and 10 Gbps speeds

  • TypeNetwork Ethernet Cables
  • Length0.6096
  • ColorBlack
  • FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
  • Supports 10 Gbps networking with 550 MHz bandwidth
  • Pure bare copper conductors meet UL 444 and TIA-568-C.2 standards
  • 26 AWG stranded wire ensures flexibility for tight routing
  • Shielded twisted-pair construction reduces electromagnetic interference
  • Snagless boot protects the RJ45 retaining clip during installation

2 ft Cat6A STP patch cable

This 2-foot Cat6A shielded twisted-pair cable is built for 10 Gigabit Ethernet links in homes, offices or server racks. It uses 26 AWG stranded pure bare copper conductors and meets the 550 MHz bandwidth rating required for 10GBASE-T performance. The snagless boot protects the RJ45 retaining clip during repeated insertion and removal.

Plug-and-play RJ45 installation

Each end terminates in a standard RJ45 connector that clicks into any 8P8C port without tools. The snagless moulded boot prevents the clip from catching on adjacent cables or panel openings. Because the conductors are stranded, the cable flexes easily for tight routing, but sharp bends or excessive tension can degrade the 550 MHz signal margin.

Verify port speed and shielding needs

Confirm that your switch, router or NIC supports 10 Gigabit Ethernet to use the full 550 MHz bandwidth. The STP construction requires a grounded shield path at both ends; ungrounded ports will not provide the intended alien-crosstalk rejection. Check that a 2-foot reach suits your rack or desk layout before ordering.

Highlights

  • Supports 10 Gbps networking with 550 MHz bandwidth
  • Pure bare copper conductors meet UL 444 and TIA-568-C.2 standards
  • 26 AWG stranded wire ensures flexibility for tight routing
  • Shielded twisted-pair construction reduces electromagnetic interference
  • Snagless boot protects the RJ45 retaining clip during installation

Specifications

BrandMonoprice
Model124327
TypeNetwork Ethernet Cables
Length0.6096
ColorBlack
FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.

Questions about this item

How can I verify the cable delivers the 550 MHz bandwidth after installation?

Use a cable certifier or network tester rated for Cat6A to confirm the link negotiates 10 Gbps and passes the 550 MHz channel test.

What comes in the box and what must I purchase separately?

The box contains the 2 ft black STP Cat6A patch cable with RJ45 connectors; no additional components are included, so buy wall plates, keystone jacks or a patch panel separately if your run requires them.

Which version or capacity should I choose for a 10 Gbps backbone?

Select the 2 ft Cat6A 550 MHz 26 AWG STP model when you need a short, shielded 10 Gbps link; longer runs or different colours are separate listings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.