Monoprice Inc.
Monoprice 116322 Cat6A SlimRun 3ft Yellow 10-pack 30AWG 550MHz
Ten slim Cat6A patch cables at 30 AWG support 10 Gigabit Ethernet in high-density racks
- TypeNetwork Ethernet Cables
- Length0.9144
- ColorYellow
- FeaturesAt half the size of standard Cat6A patch cables (0.149" v 0.
- Half-size 0.149" diameter fits twice as many cables in dense racks
- 30AWG pure bare copper meets UL 444 and TIA-568-C.2 safety standards
- 550 MHz bandwidth supports 10 Gbps Ethernet over 3-foot runs
- Snagless narrow boot prevents latch damage during tight-packed installs
- Ten yellow cables simplify colour-coded network management
SlimRun Cat6A 10-pack for dense installs
This ten-pack of Monoprice 116322 cables targets network engineers and data-centre technicians who need to maximise patch-panel density. Each 3-foot yellow lead uses 30AWG pure bare copper conductors to deliver 10-Gigabit Ethernet performance while occupying roughly half the diameter of a standard 23AWG Cat6A cable. The slim profile reduces congestion in crowded racks and telecommunications rooms. Buyers who need longer runs or thicker jackets for harsh environments should look elsewhere.
Thermals noise and power draw in normal use
As passive copper assemblies these cables draw no power and generate no audible noise, so they add nothing to a rack’s thermal load. The 0.118-inch outer diameter improves airflow between adjacent cables compared with bulkier 0.29-inch alternatives, helping equipment fans run at lower speeds. Pure bare copper construction meets UL 444 and TIA-568-C.2 fire-safety requirements without introducing active components. No cooling or power budgeting is required for the cables themselves.
Snagless narrow boots and lifetime warranty
The narrow boot and snagless latch design lets technicians insert and remove cables in tightly packed patch panels without catching neighbouring leads. This mechanical detail speeds up moves, adds and changes in high-density installations. Monoprice backs the entire 10-pack with a lifetime warranty, replacing any cable that fails to meet the 550MHz Cat6A specification. No software, drivers or management utilities are bundled or required.
Highlights
- Half-size 0.149" diameter fits twice as many cables in dense racks
- 30AWG pure bare copper meets UL 444 and TIA-568-C.2 safety standards
- 550 MHz bandwidth supports 10 Gbps Ethernet over 3-foot runs
- Snagless narrow boot prevents latch damage during tight-packed installs
- Ten yellow cables simplify colour-coded network management
Specifications
| Brand | Monoprice |
|---|---|
| Model | 116322 |
| Type | Network Ethernet Cables |
| Length | 0.9144 |
| Color | Yellow |
| Features | At half the size of standard Cat6A patch cables (0.149" v 0.29"), SlimRun Cat6A helps reduce congestion in high-density environments, such as data centers and telecommunications rooms |
Questions about this item
How do I install these 30AWG SlimRun Cat6A cables in a high-density patch panel without snagging the narrow boot?
Align the snagless narrow boot with the port, push straight in until the latch clicks, and avoid angling the 0.118-inch cable which can bend the latch. The 0.149-inch diameter lets you route more cables side by side.
What maintenance or replacement will the 10-pack of 3-foot yellow Cat6A cables need over time?
Inspect the RJ45 latches and 30AWG conductors periodically for wear; replace any cable with damaged boots or kinks. Pure bare copper construction resists corrosion, so only physical damage requires replacement.
At what point does the 550MHz 30AWG cable hit its limit during sustained 10-Gigabit Ethernet traffic?
The 30AWG gauge and 3-foot length keep insertion loss within Cat6A limits for 10GBASE-T; the first limit is the 100-metre channel rule, not the patch cord itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



