We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten slim gray Cat6A patch cables with narrow snagless boots, each 1.524m long

Monoprice Inc.

Monoprice 115159 SlimRun Cat6A Network Ethernet Cable 1.524m Gray 10-Pack

SKU CH-3TS0-9A0KT

A ten-pack of slim 1.524-metre Cat6A patch cables with 0.118-inch diameter and snagless boots for dense racks

  • TypeNetwork Ethernet Cables
  • Length1.524
  • ColorGray
  • FeaturesAt half the size of standard Cat6A patch cables (0.149" v 0.
  • Half-size 0.149-inch diameter cuts rack congestion
  • 30AWG pure copper supports 10G at 550MHz
  • Snagless narrow boots simplify dense patch-panel installs
  • Backward compatible with Fast and Gigabit Ethernet
  • Ten-cable pack speeds large-scale deployments

SlimRun Cat6A 10-pack for high-density installs

This ten-pack of Monoprice SlimRun Cat6A cables is built for network engineers and data-centre technicians who need to maximise patch-panel density. Each 1.524 m grey lead uses 30 AWG pure bare copper conductors and a 0.118-inch overall diameter to fit tight cable-management channels. The snagless narrow boot eases insertion and removal in crowded racks.

550 MHz bandwidth enables 10 GbE over copper

The cable is rated at 550 MHz and meets TIA-568-C.2 Category 6A requirements, so it supports 10-Gigabit Ethernet across the full 1.524 m length. Backward compatibility with Fast Ethernet and Gigabit Ethernet means existing switches and NICs work without reconfiguration. UL Code 444 listing confirms the pure bare copper construction satisfies fire and safety codes.

Handles 10 GbE runs up to 1.524 m.

At 30 AWG the conductors are thinner than typical 23 AWG Cat6A, so attenuation rises faster with distance. The 1.524 m length stays comfortably within the 10 GbE channel budget for patch cords, but installers should not extend these leads beyond the supplied length without recertifying the link. For permanent horizontal runs or distances above 1.524 m, standard-gauge Cat6A or Cat6A solid-core cable remains the appropriate choice.

Highlights

  • Half-size 0.149-inch diameter cuts rack congestion
  • 30AWG pure copper supports 10G at 550MHz
  • Snagless narrow boots simplify dense patch-panel installs
  • Backward compatible with Fast and Gigabit Ethernet
  • Ten-cable pack speeds large-scale deployments

Specifications

BrandMonoprice
Model115159
TypeNetwork Ethernet Cables
Length1.524
ColorGray
FeaturesAt half the size of standard Cat6A patch cables (0.149" v 0.29"), SlimRun Cat6A helps reduce congestion in high-density environments, such as data centers and telecommunications rooms

Questions about this item

How does the 550 MHz bandwidth hold up when I run 10 Gbps through this cable in a real rack?

The cable is rated for 550 MHz and 10 Gigabit Ethernet, using pure bare copper conductors that meet TIA-568-C.2 requirements for that speed.

What does the RJ45 interface actually limit when I plug this into a standard switch port?

The RJ45 connector follows the Cat6A pinout, so the link will negotiate up to 10 Gbps; the 30 AWG conductors and 0.118 inch diameter do not change the electrical interface.

Will the 0.149 inch diameter and snagless narrow boots fit cleanly into a high-density patch panel?

At 0.149 inch diameter — half a standard Cat6A cable — with a 0.118 inch flexible jacket and narrow snagless boots, the cable is designed to route cleanly in crowded panels.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.