We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Monoprice Inc.

Monoprice 115146 SlimRun Cat6A network ethernet cable 14ft Blue 5-Pack

SKU CH-D286-MM8G7

Five 14-foot Cat6A patch cables with 30AWG conductors and a 0.118-inch diameter for dense 10G networks

  • TypeNetwork Ethernet Cables
  • Length4.2672
  • ColorBlue
  • FeaturesAt half the size of standard Cat6A patch cables (0.149" v 0.
  • Half-size 0.149" diameter cuts rack congestion
  • 30AWG pure copper supports 10 GbE at 550 MHz
  • Snagless narrow boots speed dense patch-panel installs
  • Five 14 ft cables simplify multi-drop deployments
  • UL 444 and TIA-568-C.2 compliant for safety

Slim 10G Cat6A for dense racks

This five-pack of 14-foot Cat6A patch cables uses a 30AWG construction that measures roughly half the diameter of standard 23AWG equivalents. The reduced bulk lets installers route more links through existing pathways in data centres and telecommunications rooms without enlarging cable trays. Each cable is built with pure bare copper conductors and meets UL 444 and TIA-568-C.2 fire-safety requirements.

Narrow snagless boots ease high-density installs

The 0.118-inch overall diameter and low-profile snagless boots allow tighter side-by-side packing in patch panels and switches. This physical design reduces the time and expense of adding new pathways when port counts grow. Backwards compatibility with Fast Ethernet and Gigabit Ethernet means the same cables serve legacy and 10-Gigabit segments simultaneously.

550 MHz bandwidth handles 10G up to full reach

Rated at 550 MHz, the cables support 10-Gigabit Ethernet across their entire 14-foot length while leaving headroom for alien-crosstalk margin in bundled runs. The thinner 30AWG conductors increase insertion loss compared with 23AWG cable, so runs beyond the specified length or in high-temperature bundles may exceed channel loss budgets. Buyers needing longer 10G links or PoE budgets above the cable's gauge rating should consider standard-thickness Cat6A instead.

Highlights

  • Half-size 0.149" diameter cuts rack congestion
  • 30AWG pure copper supports 10 GbE at 550 MHz
  • Snagless narrow boots speed dense patch-panel installs
  • Five 14 ft cables simplify multi-drop deployments
  • UL 444 and TIA-568-C.2 compliant for safety

Specifications

BrandMonoprice
Model115146
TypeNetwork Ethernet Cables
Length4.2672
ColorBlue
FeaturesAt half the size of standard Cat6A patch cables (0.149" v 0.29"), SlimRun Cat6A helps reduce congestion in high-density environments, such as data centers and telecommunications rooms

Questions about this item

Will the 30AWG pure bare copper conductors need replacement sooner than thicker cables?

The 30AWG pure bare copper wire meets UL 444 and TIA-568-C.2 standards, so the conductors themselves do not degrade faster; only physical damage from repeated bending or connector wear would require replacement.

What is the first limit reached when running 10G traffic continuously over 14ft?

The 550 MHz bandwidth rating and 10G capability are maintained across the full 14ft length, so sustained throughput is not the bottleneck; cable density and airflow in the pathway become the practical limits first.

Does the 0.118-inch diameter cable run hotter or draw more power in a packed rack all day?

The smaller diameter improves airflow and reduces congestion, so heat buildup is lower than with standard 0.29-inch Cat6A; the cable carries only data signals and draws no power itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.