Monoprice 109544 Cat5e network ethernet cable 0.5 ft black

Short patch cable for tight connections

This half-metre Cat5e patch cable fits between devices stacked in a rack or on a desk where a longer lead would coil awkwardly. It uses 24 AWG stranded pure bare copper conductors and 50 µm gold-plated contacts for reliable Gigabit Ethernet links. The flat profile and snagless boots simplify routing through cable managers or under doors. Home-office users and installers needing a tidy, standards-compliant jumper will find the length practical.

Consistent throughput on a 350 MHz channel

The UTP construction is rated for 350 MHz bandwidth, supporting sustained Gigabit speeds without the signal drop-off seen on cheaper CCA alternatives. Pure bare copper meets UL 444 and TIA-568-C fire-safety requirements, so the cable maintains performance during long transfers or PoE loads. Gold-plated contacts resist oxidation that can degrade throughput over time. The short run keeps attenuation well within Cat5e limits for continuous operation.

Verify port spacing and jacket preference

Measure the distance between the two RJ45 ports you intend to connect; 0.5 ft leaves almost no slack for movement or strain relief. Confirm that a flat, unshielded jacket suits the environment — it slides easily under carpet but offers no EMI shielding for noisy electrical rooms. The snagless boots require enough clearance to depress the latch during removal. Buyers needing longer runs, shielded cable, or outdoor-rated jackets should select a different model.