Monoprice Inc.
Monoprice 104765 XLR to 1/4in TRS 35ft 16AWG
Balanced XLR to 1/4" TRS cable, 35 ft long, 16 AWG, gold-plated connectors, prevents ground loops and rejects interference
- TypeOthers
- ColorBlack
- Length10.668
- Connector Number2
- FeaturesBuy with Confidence: With Monoprice's Lifetime Warranty on a
- Balanced XLR to 1/4" TRS connection eliminates noise in studio and stage setups
- Braided shield adds interference resistance without modulating noise into the signal
- Design prevents ground loop issues for cleaner audio
- 35-foot length with 16AWG conductors supports long runs
- Lifetime warranty backs every cable for lasting confidence
Studio cable for balanced audio
The Monoprice 104765 is a 35 foot XLR male to 1/4 inch TRS male cable built with 16 AWG conductors and gold‑plated contacts. It serves musicians, engineers and installers who need a long, balanced interconnect for microphones, mixers, interfaces or stage boxes. The black jacket and braided shield are designed for professional studio and live‑sound environments.
Integrates with pro gear using standard connectors
The cable plugs directly into any device with a three‑pin XLR output and a quarter‑inch TRS input, requiring no adapters or active electronics. Its separate braided shield rejects electromagnetic interference without coupling noise into the signal path, and the balanced topology prevents ground‑loop hum when linking equipment across different power circuits. The 10.668 metre reach frees placement of performers or rack gear without signal degradation.
Replaces unbalanced or shorter runs that pick
Builders upgrading from consumer TS cables or short patch leads gain the common‑mode rejection of a true balanced line, eliminating hum and radio‑frequency pickup over long distances. The jump is worthwhile whenever the signal must travel past lighting dimmers, power supplies or long cable trays where unshielded or single‑ended wiring fails. It does not suit applications needing a stereo 3.5 mm or 2.5 mm mini‑jack connection.
Highlights
- Balanced XLR to 1/4" TRS connection eliminates noise in studio and stage setups
- Braided shield adds interference resistance without modulating noise into the signal
- Design prevents ground loop issues for cleaner audio
- 35-foot length with 16AWG conductors supports long runs
- Lifetime warranty backs every cable for lasting confidence
Specifications
| Brand | Monoprice |
|---|---|
| Model | 104765 |
| Type | Others |
| Color | Black |
| Length | 10.668 |
| Connector Number | 2 |
| Features | Buy with Confidence: With Monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers. |
Questions about this item
How does the 16AWG conductor hold up on a 35-foot run under continuous stage use?
The 16AWG gauge keeps resistance low across the 35-foot length, so signal loss stays minimal even during long sets.
Does the braided shield stay quiet when the cable sits next to power strips all day?
A separate braided shield blocks interference without modulating it into the signal, preventing ground-loop hum in busy racks.
What connectors must my mixer and mic already have for this cable to plug straight in?
One end needs an XLR female input and the other a 1/4-inch TRS female jack for the male plugs on this cable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
