Monoprice Inc.
Monoprice 104062 100ft RG6 18AWG 75Ohm Quad Shield CL2 Coaxial RF Cable White
A 100 ft RG6 quad-shield coaxial cable with 18 AWG copper-clad steel conductor, 75 Ohm impedance and F-type connectors, rated for 3.0 GHz and 2200 MHz sweep-tested performance
- TypeOthers
- ColorWhite
- Length99.97 ft.
- Connector Number2
- Reliable signal transmission up to 3.0 GHz bandwidth
- Quad shield construction reduces interference for cleaner reception
- 18 AWG copper clad steel conductor provides durable performance
- 75 Ohm impedance matches standard video and satellite systems
- CL2 rating allows safe in-wall installation for permanent setups
100 ft RG6 Quad Shield Cable
This 99.97 ft coaxial cable uses an 18 AWG copper-clad steel centre conductor and quad shielding for cable TV, satellite and antenna runs. It is rated for 75 Ohm impedance and sweep-tested to 3.0 GHz. The white jacket carries a CL2 rating for in-wall installation.
Pre-terminated F-Type connectors
Two F-Type connectors are factory-fitted so no crimping or compression tools are required. The foam polyethylene dielectric is firm, so the cable must be routed with gentle bends to avoid kinking the centre conductor. Over-tightening the connectors can strip the threads on wall plates.
2200 MHz bandwidth headroom
The 2200 MHz sweep rating provides margin for current DOCSIS 3.1 and satellite IF bands. At the full 100 ft length, insertion loss remains within spec for typical distribution runs. Runs significantly longer than 100 ft or splits without amplification will exceed the cable’s loss budget.
Highlights
- Reliable signal transmission up to 3.0 GHz bandwidth
- Quad shield construction reduces interference for cleaner reception
- 18 AWG copper clad steel conductor provides durable performance
- 75 Ohm impedance matches standard video and satellite systems
- CL2 rating allows safe in-wall installation for permanent setups
Specifications
| Brand | Monoprice |
|---|---|
| Model | 104062 |
| Type | Others |
| Color | White |
| Length | 99.97 ft. |
| Connector Number | 2 |
Questions about this item
How can I confirm the 100ft RG6 cable is passing a clean 2200 MHz signal after I connect it?
Use a signal meter or the diagnostic screen on your satellite receiver or cable modem; a solid lock with low error counts at 2200 MHz shows the quad-shield 18 AWG run is performing to its 3.0 GHz sweep rating.
What comes in the box with the 104062 cable and what must I supply separately?
The package includes the 99.97 ft white coaxial cable with two factory-fitted F-type connectors; you will need any wall plates, splitters, compression tools or grounding blocks required by your specific installation.
The listing shows a single 100ft length — how do I decide if that length suits my run?
Measure the exact path from source to outlet including slack for corners; if the total is well under 99.97 ft the single piece works, otherwise you will need a second length and a barrel connector to join them.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114452BTC
In stock
