We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Monoprice Inc.

Monoprice 103546 6ft 28AWG DVI-D Dual Link Extension Cable

SKU CH-A5YD-M1GSE

Extends a DVI-D dual-link connection by six feet using 28 AWG cable with male-to-female connectors

  • TypeOthers
  • ColorBlack
  • Length6 ft.
  • Cable Length6 ft.
  • Connector Number1
  • Dual-link DVI-D extension adds 6 ft reach for distant displays
  • 28 AWG conductors maintain signal integrity over the full length
  • Male-to-female connectors join existing cables without adapters
  • CL2 rating allows safe in-wall installation
  • Black jacket matches typical workstation aesthetics

What this cable does

The Monoprice 103546 is a six-foot DVI-D dual-link extension cable with a male connector on one end and a female connector on the other. It is built for users who need to bridge a short gap between a graphics card or KVM switch and a monitor without replacing the existing cable run.

Dual-link bandwidth requirement

The cable carries a dual-link DVI-D signal, which is the single specification that determines whether it will drive a high-resolution display at its native refresh rate. A single-link cable cannot pass the same pixel clock, so verifying that the source and display both use dual-link ports is the only compatibility check required.

Signal integrity over distance

At six feet the 28 AWG conductors keep attenuation low enough that the digital signal arrives at the monitor without the sparkles or drop-outs that appear on longer, thinner runs. The CL2-rated jacket meets in-wall fire codes, so the cable behaves reliably whether it is routed behind a desk or pulled through a wall cavity.

Highlights

  • Dual-link DVI-D extension adds 6 ft reach for distant displays
  • 28 AWG conductors maintain signal integrity over the full length
  • Male-to-female connectors join existing cables without adapters
  • CL2 rating allows safe in-wall installation
  • Black jacket matches typical workstation aesthetics

Specifications

BrandMonoprice Inc.
Model103546
TypeOthers
ColorBlack
Length6 ft.
Cable Length6 ft.
Connector Number1

Questions about this item

How far can the 6 ft length reliably carry a dual-link DVI signal?

The cable is built to the DVI standard defined by DDWG and uses 28 AWG conductors to support dual-link bandwidth over the full 6 ft run.

What does the CL2 rating on the jacket mean for installation?

CL2 indicates the cable meets UL fire-safety requirements for in-wall and plenum routing in residential and commercial buildings.

Will the male-to-female connectors add bulk behind a tight monitor?

Each end uses a standard DVI-D dual-link shell; the female side adds roughly the same depth as a typical monitor port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.