We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat 6 crossover ethernet cable on easy-pull spool, 1000 ft length

Monk Cables

Monk Cables Cat 6 Crossover 1000 ft Green network ethernet cable

SKU CH-WNNE-DVE1B

1000 ft green Cat 6 crossover bulk cable rated 550 MHz with 23 AWG solid conductors, plenum CMP jacket, Fluke-tested to TIA/EIA 568.2C, supports PoE+ 60 W.

  • TypeNetwork Ethernet Cables
  • Cat6 (Crossover)
  • Connector ARJ45
  • Connector BRJ45
  • Length1000 ft.
  • ColorGreen
  • Tangle-free easy-pull box simplifies installation
  • 1000 ft length with foot markers aids measuring
  • Fluke DTX-1800 tested to TIA/EIA 568.2C standards
  • 23AWG solid conductors deliver 550 MHz bandwidth
  • Supports PoE and PoE+ up to 60W

Cat 6 Crossover Bulk Cable

This Cat 6 crossover cable ships as a 1000 ft bulk reel in a green plenum-rated jacket. It uses 23 AWG solid conductors arranged in four twisted pairs with a spline separator. The cable is tested to 550 MHz bandwidth and carries CMP plenum, RoHS and TIA/EIA 568.2C certifications.

Practical Limits of Cat 6 Crossover

Crossover wiring swaps transmit and receive pairs so the cable links two similar devices directly without a switch or router. Cat 6 supports 10 Gigabit Ethernet up to 550 MHz, yet the standard limits 10GBASE-T runs to 100 metres. PoE and PoE+ devices drawing up to 60 W are supported, but higher power standards require different cabling.

Upgrade From Cat 5e And When To Switch

Builders replacing Cat 5e gain headroom for 10 Gigabit speeds and reduced crosstalk from the internal spline. The jump is worth it when new runs must carry 10GBASE-T, PoE+ loads or plenum-rated pathways. Installations staying at 1 Gigabit with no plenum requirement see no practical benefit.

Highlights

  • Tangle-free easy-pull box simplifies installation
  • 1000 ft length with foot markers aids measuring
  • Fluke DTX-1800 tested to TIA/EIA 568.2C standards
  • 23AWG solid conductors deliver 550 MHz bandwidth
  • Supports PoE and PoE+ up to 60W

Specifications

TypeNetwork Ethernet Cables
Cat6 (Crossover)
Connector ARJ45
Connector BRJ45
Length1000 ft.
ColorGreen

Questions about this item

Should I choose the 1000 ft bulk roll or a shorter pre-terminated cable for my installation?

The 1000 ft bulk roll lets you cut exact lengths for each run and terminate connectors on-site, while pre-terminated cables suit fixed short distances where pulling bulk cable is impractical.

What does the 550 MHz bandwidth rating deliver in a real network?

The 550 MHz bandwidth supports 10 Gigabit Ethernet speeds over the full 1000 ft run, giving headroom above the Cat 6 minimum for stable high-throughput links.

How does the CMP plenum rating affect where I can run this cable?

The CMP plenum rating means the jacket meets fire-safety standards for installation in air-handling spaces such as drop ceilings and raised floors without conduit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.