We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3-pin addressable RGB 2-way splitter cable, 30cm length

ModMyMods

ModMyMods MOD-0282 3-Pin Addressable RGB 2-Way Splitter Cable 30cm

SKU CH-KG9D-70XNW

Splits a single 5 V addressable RGB header into two connectors with a 30 cm black cable

  • ColorBlack
  • Features5V Addressable / Digital RGB Splitter Cable

Type 2-Way

  • Splits one 3-pin addressable RGB header into two connections
  • 30 cm length suits compact case routing
  • Black finish blends with dark-themed builds
  • Compatible with any 3-pin digital RGB connector
  • Male-to-male adapter available for flexible wiring

Addressable RGB Splitter Cable

The ModMyMods MOD-0282 splits a single 3-pin addressable RGB header into two connections for LED strips or fans. It is built for PC builders who want to run multiple digital RGB devices from one motherboard or controller port. The 30 cm length keeps cable routing tidy inside compact or full-size cases. No extra drivers or software are required for operation.

Passive Thermal Behaviour

The splitter adds no active components, so it draws negligible power and produces no heat or noise of its own. Signal integrity is maintained across both branches for standard 5 V addressable RGB protocols. Normal use sees no measurable voltage drop that would affect LED colour accuracy. The black insulation blends with typical internal wiring looms.

Simple Daisy-Chain Expansion

The package supplies the splitter cable alone; no male-to-male adapter, mounting clips or control software are included. Builders who need longer runs must source separate extension cables. Users requiring three or more branches will need an additional splitter or a different multi-way model. The bare-cable design keeps cost and bulk to a minimum.

Highlights

  • Splits one 3-pin addressable RGB header into two connections
  • 30 cm length suits compact case routing
  • Black finish blends with dark-themed builds
  • Compatible with any 3-pin digital RGB connector
  • Male-to-male adapter available for flexible wiring

Specifications

BrandModMyMods
ModelMOD-0282
ColorBlack
Features5V Addressable / Digital RGB Splitter Cable

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I plug the 30cm 3-pin addressable RGB splitter into my motherboard header without reversing the data pin?

Align the arrow or missing-pin key on the female connector with the 5V mark on the motherboard header; the data pin sits opposite the 5V pin, so the cable only seats one way.

What upkeep does the black 3-pin addressable RGB splitter cable need over time?

No scheduled maintenance; just reseat the connectors if LEDs flicker and inspect the 30cm cable for kinks or pin corrosion during major rebuilds.

At what point does the 2-way 3-pin addressable RGB splitter hit its limit during continuous lighting loads?

The splitter passes the motherboard header’s 5V current rating; total attached LED draw must stay within that header limit or LEDs will dim or shut off.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.