We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic 3-pin male fan connector

ModMyMods

ModMyMods MOD-0109 3-Pin Fan Male Connector Black

SKU CH-97T4-JC1DC

Black 3-pin male fan connector for custom PSU cable extensions or repairs

  • ColorBlack
  • FeaturesLooking to replace the dingy beige or faded black connectors
  • Replace worn beige connectors with clean black ones
  • Build custom fan or pump extensions using the male 3-pin end
  • Match every standard PSU, fan or SATA cable in your system
  • Order single connectors or full sets for flexible upgrades
  • Model MOD-0109 identifies the exact part you need

Replacement 3-pin fan connector

This ModMyMods MOD-0109 male connector replaces worn or mismatched plugs on internal fan or pump cables. The black housing blends with modern builds and custom sleeving projects. It suits DIY cable makers who need a clean termination point.

Thermals noise and power

As a passive connector it adds no heat, noise or measurable power draw to the system. Current passes through the crimped pins without active components. Thermal performance depends entirely on the attached fan or pump.

Build and daily use

The male 3-pin shell fits standard fan headers and extension cables for straightforward routing. Crimp-style pins require a suitable tool for reliable termination. Buyers needing pre-crimped leads or female headers will need a different part.

Highlights

  • Replace worn beige connectors with clean black ones
  • Build custom fan or pump extensions using the male 3-pin end
  • Match every standard PSU, fan or SATA cable in your system
  • Order single connectors or full sets for flexible upgrades
  • Model MOD-0109 identifies the exact part you need

Specifications

BrandModMyMods
ModelMOD-0109
ColorBlack
FeaturesLooking to replace the dingy beige or faded black connectors on your PSU cable set? We offer replacement connectors for every standard internal PSU, fan or sata cable that you could need. We offer a wide range of connectors and pins both individually or in sets.

Questions about this item

How do I install the MOD-0109 3-pin male connector onto my fan cable?

Crimp each wire into the supplied pins, then push the pins into the housing until the locking tabs click; the step people miss is verifying every pin is fully seated before plugging the fan in.

Will the MOD-0109 connector need any maintenance or replacement later?

The connector itself has no moving parts, but repeated unplugging can wear the latch; if the latch breaks or pins oxidise, simply swap in a new MOD-0109 housing.

What is the first limit I hit when running a pump continuously through the MOD-0109?

Sustained current heats the crimp joints first; if the wire gauge is undersized for the pump draw, the connector body will soften before the latch fails.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.