We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 19-pin header cable splitting to two USB 3.0 ports

ModMyMods

ModMyMods MOD-0085 USB 3.0 19-Pin to 2x USB 3.0 Adaptor

SKU CH-A15R-2Y832

Connects a motherboard 19-pin USB 3.0 header to two external USB 3.0 ports

  • ColorBlack
  • FeaturesMotherboard USB 3.0 19-Pin to USB3.0 x 2 Cable Adaptor
  • Adds two USB 3.0 ports from a single 19-pin header
  • Black and dark-blue colour matches most motherboard aesthetics
  • Simple internal installation with standard USB 3.0 power connector
  • Genuine ModMyMods MOD-0085 adaptor built for reliable connectivity
  • Expands front-panel or chassis USB 3.0 connectivity without extra brackets

ModMyMods MOD-0085 USB 3.0 19-Pin Adaptor

This adaptor connects a motherboard 19-pin header to two external USB 3.0 ports. It suits builders adding front-panel connectivity to a chassis that lacks native headers. The black and dark blue cable routes internally for a clean installation. New condition ensures reliable contact surfaces.

Dual USB 3.0 ports from one 19-pin header

The splitter provides two full USB 3.0 Type-A sockets from a single internal connector. Bandwidth is shared between both ports, so simultaneous high-speed transfers will divide available throughput. It handles typical peripherals such as drives, input devices and chargers. Very high sustained loads may saturate the single upstream link.

Fits standard motherboard USB 3.0 headers

The 19-pin plug mates with the common front-panel header found on modern boards. No additional drivers are required beyond the OS USB stack. The cable frees rear I/O ports by moving connections to the front panel. Builders must verify header pin-out compatibility before installation.

Highlights

  • Adds two USB 3.0 ports from a single 19-pin header
  • Black and dark-blue colour matches most motherboard aesthetics
  • Simple internal installation with standard USB 3.0 power connector
  • Genuine ModMyMods MOD-0085 adaptor built for reliable connectivity
  • Expands front-panel or chassis USB 3.0 connectivity without extra brackets

Specifications

BrandGENERIC
ModelMOD-0085
ColorBlack
FeaturesMotherboard USB 3.0 19-Pin to USB3.0 x 2 Cable Adaptor

Questions about this item

Will the 19-pin header fit the USB 3.0 connector on my older motherboard?

The adaptor uses a standard 19-pin internal USB 3.0 header, which matches the connector found on most motherboards that support USB 3.0 front-panel ports.

How can I verify the two USB 3.0 ports are running at full speed after installation?

Connect a USB 3.0 flash drive and check the transfer rate in your operating system; speeds consistent with USB 3.0 indicate the header and cable are functioning correctly.

Does the MOD-0085 package include a separate power cable or mounting bracket?

The adaptor draws power directly from the motherboard header, so no extra power cable or bracket is supplied or required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.