We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 24-pin ATX power supply jumper with push-button switch

ModMyMods

ModMyMods Jump Start EPS/ATX 24 Pin Power Supply Jumper On/Off Switch - No Light (MOD-0271)

SKU CH-VRPC-HC0TS

A 24-pin jumper with an on/off button powers an ATX supply without a motherboard

  • ColorBlack
  • FeaturesDo you need to turn on an ATX power supply without a motherb
  • Turn on an ATX PSU without a motherboard using the built-in 24-pin female Molex connector
  • Replace paperclip jumpers with a dedicated on/off button for safer bench testing
  • Simple press operation activates the power supply instantly
  • Black 24-pin design fits standard EPS/ATX connectors
  • Model MOD-0271 provides a compact switching solution for PSU testing

ATX 24-Pin Jumper Switch

This compact adapter plugs into a standard 24-pin ATX connector on a power supply and provides a physical on/off button. It lets technicians or hobbyists power the unit without a motherboard installed. The black housing contains no indicator light. Model reference is MOD-0271.

Bench testing and PSU diagnostics

Ideal for verifying a power supply before installation, running pumps during liquid-cooling loop filling, or powering peripherals on a test bench. Builders who need the PSU to stay permanently on without a momentary switch, or who require a lighted status indicator, should choose a different tool.

24-pin female Molex interface

The only connection is a 24-pin female Molex socket that mimics the motherboard power-on signal. Pressing the button bridges the PS-ON and ground pins to start the supply. No other cables, headers or voltage selections are present.

Highlights

  • Turn on an ATX PSU without a motherboard using the built-in 24-pin female Molex connector
  • Replace paperclip jumpers with a dedicated on/off button for safer bench testing
  • Simple press operation activates the power supply instantly
  • Black 24-pin design fits standard EPS/ATX connectors
  • Model MOD-0271 provides a compact switching solution for PSU testing

Specifications

BrandGENERIC
ModelMOD-0271
ColorBlack
FeaturesDo you need to turn on an ATX power supply without a motherboard? Tired of using paperclips, or other rigged methods of turning the system on? Then our ATX Power Supply Reset Switch is the answer.

Questions about this item

Does the jumper draw any power or generate heat when the PSU runs continuously?

The device is a passive mechanical switch with no active electronics, so it adds no measurable power draw or heat during extended operation.

What connectors must my power supply already provide for this jumper to work?

Your PSU needs a standard 24-pin ATX/EPS output; the jumper plugs directly into that female Molex socket to bridge the power-on pins.

Will this switch work with an older ATX supply that uses the 20-pin main connector?

No — the jumper only fits a 24-pin ATX/EPS header, so it cannot connect to legacy 20-pin power supplies.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.