We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 24-pin triple PSU adapter cable with three 30cm leads

ModMyMods

ModMyMods 24-Pin Triple PSU Adapter Cable 30cm Black MOD-0211

SKU CH-KB0Z-M3XAV

Connects three power supplies to one motherboard for simultaneous start-up using 24-pin connectors

  • Cable Length1 ft.
  • Powers multiple PSUs from one motherboard signal
  • 30 cm main cable reaches the primary PSU easily
  • 30 cm jumper leads connect extra PSUs cleanly
  • 24-pin connectors fit standard ATX motherboards
  • Black sleeving keeps the build looking tidy

Power-on control for three PSUs

This adapter cable lets a single motherboard signal turn on up to three power supplies at once. The main 30 cm section plugs between the board and the primary PSU, while two extra 30 cm leads connect the additional units. It is built for systems that draw far more current than one supply can deliver.

Mining rigs and multi-GPU compute boxes

Builders running several high-wattage cards from separate PSUs will find the simultaneous start-up useful. Anyone assembling a standard desktop or a workstation with a single power supply gains nothing from this cable and should use a normal 24-pin extension instead.

Two extra 24-pin jumpers included

The bundled jumpers are the only parts that make multi-PSU power-on possible; without them each additional supply would need its own manual switch or paper-clip jumper. No software, drivers or extra connectors are supplied.

Highlights

  • Powers multiple PSUs from one motherboard signal
  • 30 cm main cable reaches the primary PSU easily
  • 30 cm jumper leads connect extra PSUs cleanly
  • 24-pin connectors fit standard ATX motherboards
  • Black sleeving keeps the build looking tidy

Specifications

Cable Length1 ft.

Questions about this item

Do I need three separate power supplies to use the 24-pin triple adapter cable?

The 30 cm main portion connects the first PSU to the motherboard while each 30 cm lead plugs into an additional PSU, so two or three units can be used.

Will the 30 cm jumpers reach a second PSU mounted in a separate chamber of my case?

Each additional lead is 30 cm long, which typically spans the gap between a main chamber and a rear PSU bay in standard ATX cases.

How can I confirm the 24-pin triple cable is triggering all supplies at once?

When the motherboard powers on, every connected PSU should spin up simultaneously because the adapter passes the PS-ON signal through all 24-pin jumpers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.