Mitsubishi
Mitsubishi LVP-FD630U-LAMP DLP Replacement Lamp 280W 20.8V
A 280 W DLP projector lamp rated 20.8 V with 3,000-hour full-power life and 5,000-hour eco-mode life
- TypeProject Lamp
- Weight0.9990
- Genuine Mitsubishi fit ensures correct alignment
- Osram bulb inside delivers reliable light output
- 280 W at 20.8 V matches original power spec
- 3 000 hours full power or 5 000 hours eco mode extends usable life
- Weighs .9990 kg for straightforward handling
Direct-fit lamp for Mitsubishi LVP-FD630U
This replacement lamp and housing module is built for the Mitsubishi LVP-FD630U projector. It ships new with an Osram bulb inside the factory housing so the installer does not need to handle a bare burner. The unit weighs 0.9990 kg and draws 280 W at 20.8 V.
Replaces the original 280 W module when brightness
The lamp is rated for 3,000 hours at full power and 5,000 hours in eco mode. Swapping it restores the projector's original light output without changing any settings. The jump is worth it when the on-screen image dims noticeably or the replacement warning appears.
Tool-free housing swap in minutes
The complete housing slides into the projector's lamp bay and locks with the existing latch; no screws or alignment of a bare bulb are required. The most common issue is forgetting to reset the hour counter in the menu, which leaves the warning active. Dust on the new lens surface can also cause hot-spots, so a quick blow-off before closing the door prevents rework.
Highlights
- Genuine Mitsubishi fit ensures correct alignment
- Osram bulb inside delivers reliable light output
- 280 W at 20.8 V matches original power spec
- 3 000 hours full power or 5 000 hours eco mode extends usable life
- Weighs .9990 kg for straightforward handling
Specifications
| Brand | Mitsubishi |
|---|---|
| Model | LVP-FD630U-LAMP |
| Part Number | LVP-FD630U-LAMP |
| Type | Project Lamp |
| Weight | 0.9990 |
Questions about this item
Will the LVP-FD630U-LAMP module fit directly into the Mitsubishi LVP-FD630U projector without an extra housing?
Yes, the unit is a complete lamp-and-housing module made for the LVP-FD630U projector, so it installs as a single piece without a separate cage.
What is the installation step that users most often miss when replacing this lamp?
After sliding the module in and securing the screws, the projector's lamp-hour counter must be reset through the on-screen menu; otherwise the replacement warning stays on.
How many hours can the 280 W Osram bulb run before it needs replacing?
Rated life is 3,000 hours at full power and 5,000 hours in eco mode, so plan a replacement after reaching whichever limit applies to your usage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Blackmagic Design Pty. Ltd. DeckLink 4K Extreme 12G capture card
Xspot products Ronco Six Star+ Boning Knife #7 White 12.75 inches
Ergotron 60-154-100 HD mounting bracket for arms and extenders
- Accessory
- Accomodates HD Arms…



