We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

MIRO

MIRO U5 USB-C to USB-A adapter 2.0A 22x15x4.5mm

SKU CH-AN8C-2X49V

Connects USB-C devices to USB-A chargers or computers with stable 2.0 A transmission in a compact 22 x 15 x 4.5 mm form factor

  • Connect Type-C devices to USB-A chargers with efficient adaptation
  • Stable 2.0A current transmission up to 9V for reliable charging
  • Compact 22x15x4.5mm design fits easily in any bag
  • Transforms legacy USB-A ports into Type-C connectivity
  • Black finish matches modern device aesthetics

Compact Type-C to USB-A Adapter

The MIRO U5 adapter bridges USB-C devices with legacy USB-A chargers, power banks or computers. Its 22 by 15 by 4.5 mm black housing plugs directly into a standard USB-A port to provide a female Type-C receptacle. The tiny form factor makes it practical for daily carry alongside cables or in a laptop bag. It suits users who need to connect newer Type-C gear to older USB-A power sources without replacing existing equipment.

Passive Operation With 9V and 2.0A Limits

The adapter supports up to 9 volts and 2.0 amps for both charging and data transfer. Because it contains no active electronics or fan, it adds no audible noise and draws negligible power beyond the connected device. Thermal output is limited to the minimal resistance of the internal contacts during normal use. Stable 2.0A transmission is maintained without speed drops for typical file transfers and charging sessions.

Sustained Load Behaviour Within Rated Current

Under continuous load the adapter remains passive, so its temperature follows the attached cable and host port rather than generating heat of its own. Performance stays consistent as long as the source and device respect the 2.0A maximum current rating. It is not suited for applications that require higher power delivery or active signal conditioning beyond the specified 9V and 2.0A limits.

Highlights

  • Connect Type-C devices to USB-A chargers with efficient adaptation
  • Stable 2.0A current transmission up to 9V for reliable charging
  • Compact 22x15x4.5mm design fits easily in any bag
  • Transforms legacy USB-A ports into Type-C connectivity
  • Black finish matches modern device aesthetics

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the U5 adapter, and which orientation do people often get wrong?

Plug the USB‑A male end into the host port and the USB‑C female end toward the cable; the adapter is keyed so the USB‑C side only accepts a Type‑C plug one way.

What maintenance or replacement will the U5 adapter need over time?

No scheduled maintenance is required; if the spring contacts wear or the plastic housing cracks after repeated insertions, replace the whole adapter.

What electrical limit appears first when the U5 adapter runs continuously at full load?

The 2.0 A current ceiling is reached before the 9 V voltage limit, so sustained draws above 2.0 A will trigger the host’s protection first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.