We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mirka

Mirka Trim-Kut Grinding Disc 3 Inch P24 63-300-024

SKU CH-GYJ7-CCF3Z

A 3-inch Trim-Kut grinding disc rated P24 for aggressive material removal

  • 3-inch diameter suits tight access grinding
  • P24 coarse grit removes material quickly
  • Trim-Kut design allows disc trimming for extended use
  • Mirka brand delivers professional abrasive quality
  • First listed by manufacturer June 2022

Product identity

The Mirka Trim-Kut Grinding Disc 3 Inch P24 63-300-024 is a new abrasive disc from the Mirka brand. It carries the manufacturer reference 63-300-024 and was first listed by the maker in 2022. The disc is graded P24 for coarse material removal.

Replacement scope

This disc replaces worn or finer-grit abrasives when aggressive stock removal is required on metal surfaces. The jump to P24 grit is worth it when the task demands faster cutting action than higher grit numbers can provide.

Build integration

The 3 inch diameter fits compatible angle grinders and backing pads that accept this arbor size. It frees up time on heavy grinding jobs by reducing the number of disc changes needed. Users must ensure their tool speed rating matches the disc requirements.

Highlights

  • 3-inch diameter suits tight access grinding
  • P24 coarse grit removes material quickly
  • Trim-Kut design allows disc trimming for extended use
  • Mirka brand delivers professional abrasive quality
  • First listed by manufacturer June 2022

Specifications

BrandMIRKA

Questions about this item

What arbor size does the 3-inch disc need for mounting?

The disc uses a standard 3-inch diameter; the arbor hole matches common angle-grinder spindles for direct fit.

How is the Trim-Kut disc installed and what step is often missed?

Thread the disc onto the grinder spindle, tighten the retaining nut firmly, and ensure the rotation arrow points the same way as the tool spins.

When should the P24 disc be replaced during heavy grinding work?

Replace the disc once the abrasive surface wears smooth or the backing shows through, typically after several hours of aggressive material removal.

More in Machinery Motors & Parts

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.