We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular stainless steel heat exchanger with 60 plates and four threaded ports

VEVOR

VEVOR B12-60 60-Plate Brazed Heat Exchanger 316L 1/2" BSP FPT

SKU CH-5Z3J-N5M1K MPN B12-60

A 60-plate 316L stainless steel brazed heat exchanger with 1/2" BSP FPT ports for efficient liquid-to-liquid thermal transfer in hydronic heating or wort chilling applications

  • Superior heat transfer via turbulent counter-flow design across 60 plates
  • Energy-saving operation with no electricity or oxygen consumption required
  • Durable 316L stainless steel construction brazed with 99.9 % copper
  • Handles extreme conditions from -196 °C to +225 °C at 3.0 Mpa design pressure
  • Compact 7.6" x 2.8" x 6.3" size with four 1/2" BSP FPT ports

Compact brazed-plate exchanger

The VEVOR B12-60 is a 60-plate brazed heat exchanger built from 316L stainless steel with 99.9 % copper brazing. It suits hydronic heating circuits, beer wort chilling and other liquid-to-liquid duties where a small footprint and high thermal efficiency are required. The unit handles design pressures up to 3.0 Mpa and temperatures from -196 to +225.

Four BSP ports and mounting hoops

Four 1/2" BSP FPT ports allow direct threaded connections without extra adapters. A pair of hoops is included so the exchanger can be bracketed securely in tight plant rooms or brewing rigs. The supplied hardware means the unit can be plumbed and mounted straight from the box.

60-plate count drives capacity

The 60-plate stack determines the heat-transfer surface area and therefore the duty the exchanger can meet. Systems needing more capacity will require a model with additional plates, while lower-load circuits could use a smaller unit.

Highlights

  • Superior heat transfer via turbulent counter-flow design across 60 plates
  • Energy-saving operation with no electricity or oxygen consumption required
  • Durable 316L stainless steel construction brazed with 99.9 % copper
  • Handles extreme conditions from -196 °C to +225 °C at 3.0 Mpa design pressure
  • Compact 7.6" x 2.8" x 6.3" size with four 1/2" BSP FPT ports

Specifications

No published specifications for this item yet.

Questions about this item

How often should the 60-plate brazed core be inspected or replaced in a hydronic heating loop?

The 316L stainless steel plates and 99.9% copper braze form a single integral unit with no gaskets to service; under normal pressure below 3.0 MPa and temperatures between -196 °C and +225 °C the core does not have a scheduled replacement interval.

What pressure limit will be reached first if the system runs continuously at high load?

The design pressure is 3.0 MPa and the factory test pressure is 4.5 MPa, so sustained operation must stay at or below 3.0 MPa to avoid exceeding the rated limit.

How much heat does the exchanger radiate into the room when it runs all day?

The unit has no electrical components, fans or pumps, so it adds no active heat or noise; only the temperature difference between the two fluid streams determines the surface warmth of the 7.6" x 2.8" x 6.3" body.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.