We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pneumatically actuated butterfly valve, cast iron body, double acting, 2-1/2 inch pipe size

Milwaukee Valve

Milwaukee Valve GLA23E D212 Butterfly Valve Double Acting Iron 2-1/2 Inch

SKU CH-PYDD-CR94Q

Pneumatically actuated cast-iron butterfly valve with double-acting operation, EPDM seat, 150 psi water rating and 80 psi air supply

  • TypeOther
  • Double-acting pneumatic actuation enables automated flow control
  • Cast iron body withstands up to 150 psi water pressure
  • EPDM seat resists wear in water applications
  • Four-bolt lug pattern with 5-1/2 inch bolt circle simplifies installation
  • Manufactured under ISO 9001:2016 and ISO 14001:2015 quality systems

Pneumatically Actuated Butterfly Valve

This double-acting valve uses compressed air at 80 psi to open and close a cast iron disc in 2-1/2 inch piping. It is built for installers who need reliable on-off control in water systems rated up to 150 psi.

150 psi water pressure and 80 psi air supply

The EPDM seat handles water pressure up to 150 psi while the actuator requires an 80 psi air supply for full travel. Systems exceeding either pressure rating will need a different valve or pressure-reducing equipment.

Four-hole lug pattern with 5/8-11 threads

The valve body includes four bolt holes on a 5-1/2 inch bolt circle threaded 5/8-11 for direct flange mounting. No additional mounting hardware or actuation kits are included in the package.

Highlights

  • Double-acting pneumatic actuation enables automated flow control
  • Cast iron body withstands up to 150 psi water pressure
  • EPDM seat resists wear in water applications
  • Four-bolt lug pattern with 5-1/2 inch bolt circle simplifies installation
  • Manufactured under ISO 9001:2016 and ISO 14001:2015 quality systems

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

Will the 2-1/2 inch valve body with 5-1/2 inch bolt circle match my existing flanges?

The valve has a 2-1/2 inch pipe size, a 5-1/2 inch bolt circle diameter and four 5/8-11 inch lug holes for flange alignment.

How can I verify the double-acting actuator is operating correctly after installation?

Apply 80 psi air to each inlet port; the disc should rotate 90 degrees smoothly in both directions and seal against the EPDM seat at 150 psi water pressure.

Does the package include the pneumatic actuator, mounting hardware and air fittings?

The unit ships as a complete pneumatically actuated butterfly valve with double-acting actuator mounted on the cast iron body; separate air tubing and fittings are required for the 80 psi supply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.