Milwaukee Valve
Milwaukee Valve BB-SCS02 1 1/4 in Fire Sprinkler Control Valve
A 1 1/4-inch bronze butterfly valve rated for 175 psi and -30 to 250 °F with a 304 stainless-steel disc, FKM liner, gear-operated handwheel and cULus, FM and NYC BSA approvals
- TypeOther
- Controls fire-sprinkler flow with gear-operated handwheel
- Bronze body withstands 175 psi water pressure
- FKM liner handles -30 to 250 °F temperature range
- 304 stainless-steel disc resists corrosion
- cULus, FM and NYC BSA approved for compliance
Purpose-built fire sprinkler control
This Milwaukee Valve BB-SCS02 is a butterfly disc valve designed for fire sprinkler systems. It serves commercial and residential installations that require a reliable shut-off point. The gear operated handwheel allows precise manual control during testing or emergency isolation.
Critical pressure and temperature limits
The valve handles a maximum water pressure of 175 psi and operates across a temperature range of -30 to 250 degrees F. These two figures determine whether the device matches the system design; exceeding either limit voids compliance.
Straightforward installation with gear operator
The 1 1/4 in pipe size fits standard sprinkler piping without special adapters. The gear operated handwheel reduces the torque needed to open or close the disc, minimising installer fatigue. The most common issue is debris preventing a full seal, so flush the line before final tightening.
Highlights
- Controls fire-sprinkler flow with gear-operated handwheel
- Bronze body withstands 175 psi water pressure
- FKM liner handles -30 to 250 °F temperature range
- 304 stainless-steel disc resists corrosion
- cULus, FM and NYC BSA approved for compliance
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Type | Other |
Questions about this item
What does the 175 psi rating mean when the valve is installed in a fire sprinkler system?
It indicates the maximum water pressure the valve can safely handle during normal operation.
Which approvals apply to the cULus, FM and NYC BSA listings on this valve?
They confirm the valve meets the safety and performance standards required for fire protection installations in those jurisdictions.
What pipe size and connection type does the 1 1/4 in gear-operated valve require?
It fits a 1 1/4 inch pipe and uses a gear-operated handwheel for manual control.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



