We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mikrotik

Mikrotik S+RJ10 6-speed RJ-45 SFP+ module up to 10 Gbps

SKU CH-QPYK-QQMVP

An SFP+ module that delivers six copper speeds up to 10 Gbps over existing twisted-pair cables up to 200 m

  • Six selectable speeds from 10 Mbps to 10 Gbps over copper
  • Up to 200 m reach on standard twisted-pair cabling
  • Works in actively cooled SFP+ ports without extra cooling
  • Operates from −20 °C to 60 °C ambient temperature
  • Supports jumbo frames up to 10218 bytes with DDM monitoring

Copper 10 GbE upgrade for SFP+ ports

The Mikrotik S+RJ10 module adds 10 Gbps Ethernet over standard twisted-pair copper to any device with an SFP+ slot. It removes the need for fibre cabling while keeping the familiar RJ-45 connector.

Six auto-negotiated speeds up to 10 Gbps

The module negotiates 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps or 10 Gbps and reaches distances of up to 200 metres on copper. Jumbo frames up to 10218 bytes and DDM monitoring are now supported.

Suits MikroTik gear with active cooling

Devices with passive cooling may need extra airflow for reliable operation. Buyers who need fibre reach beyond 200 metres or a different SFP+ media type should choose another module.

Highlights

  • Six selectable speeds from 10 Mbps to 10 Gbps over copper
  • Up to 200 m reach on standard twisted-pair cabling
  • Works in actively cooled SFP+ ports without extra cooling
  • Operates from −20 °C to 60 °C ambient temperature
  • Supports jumbo frames up to 10218 bytes with DDM monitoring

Specifications

BrandMikrotik

Questions about this item

What does the 10 Gbps figure mean once the module is installed in a real machine?

The module negotiates six link speeds — 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps and 10 Gbps — so actual throughput matches the connected device and cable quality, up to the 10 Gbps ceiling.

What interface does the module use and what does that cap in practice?

It plugs into an SFP+ port and presents an RJ45 connector; the SFP+ electrical interface limits the link to the negotiated twisted-pair speed, maximum 10 Gbps over copper.

What does the module physically need to fit and mount in a MikroTik device?

An SFP+ cage slot; devices with active cooling accept it directly, while passively cooled units may require additional airflow to keep the module within its -20 °C to 60 °C operating range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.