Mikrotik
Mikrotik Cube 60Pro ac 60 GHz Wireless Wire Kit
Preconfigured pair of 60 GHz 802.11ay radios with automatic 5 GHz failover for point-to-point links up to 2.4 km
- Preconfigured kit of two devices for instant point-to-point links
- 60 GHz 802.11ay delivers fibre-like speed without cable runs
- Automatic 5 GHz backup keeps the link alive in heavy rain
- Metal base improves mounting strength and passive cooling
- ARM quad-core CPU with 256 MB RAM runs RouterOS v4
Preconfigured 60 GHz point-to-point kit
The kit contains two Cube 60Pro ac units ready for ultra-fast wireless bridging up to 1 km. Each unit runs a quad-core ARM processor with 256 MB RAM and 64 MB flash storage on RouterOS license 4. The devices are built for outdoor mounting with a metal base and passive cooling.
60 GHz capacity with 5 GHz failover
The 60 GHz link delivers fiber-like throughput in clear conditions and maintained a reliable connection over 2.4 km in manufacturer tests. When weather degrades the primary band, an automatic 5 GHz backup using an 11.5 dBi directional antenna activates at up to 433 Mbit/s. Performance drops if heavy rain or obstacles block the 60 GHz path.
Passive thermal design and PoE power
Passive cooling handles the 10 W maximum draw across the tested -40 °C to 70 °C ambient range. Power is supplied through a single 802.3 af/at PoE input accepting 18–48 V. No moving parts mean silent operation, but sustained loads in high heat rely entirely on the metal enclosure for dissipation.
Highlights
- Preconfigured kit of two devices for instant point-to-point links
- 60 GHz 802.11ay delivers fibre-like speed without cable runs
- Automatic 5 GHz backup keeps the link alive in heavy rain
- Metal base improves mounting strength and passive cooling
- ARM quad-core CPU with 256 MB RAM runs RouterOS v4
Specifications
No published specifications for this item yet.
Questions about this item
Will the 10/100/1000 Ethernet port on each Cube 60Pro ac connect to my existing gigabit switch?
Yes, each device has one 10/100/1000 Ethernet port that links directly to a gigabit switch using a standard Cat5e or better cable.
How can I confirm the 60 GHz link and the 5 GHz failover are active after installation?
In RouterOS check the wireless registration table for the 802.11ay interface and verify the 5 GHz backup shows as connected when the primary link drops.
Does the kit include PoE injectors or must I buy 802.3 af/at injectors separately?
The kit contains two Cube 60Pro ac units with mounting hardware; 802.3 af/at PoE injectors are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
