Mighty Line
Mighty Line 4RRLUMCTR Floor Marking Tape Vinyl 4" 100 ft 50 mil
Vinyl floor marking tape with a centre line, 100 ft roll, 50 mil thick
- Width4"
- Glow-in-the-dark visibility for low-light areas
- Retroreflective-free design avoids glare on reflective surfaces
- Durable 50 mil vinyl resists heavy floor traffic
- Continuous 100 ft roll covers long aisles
- Centre line guides straight, consistent application
Industrial Floor Marking Tape
Mighty Line 4RRLUMCTR is a continuous-roll vinyl tape designed for floor marking in industrial and commercial settings. It measures four inches wide, one hundred feet long and fifty mil thick, with a solid red colour and a printed centre line for visual guidance.
Facilities needing glow-in-the-dark guidance
The material glows in the dark and is non-retroreflective, so it suits warehouses, factories or aisles where low-light visibility matters but reflectivity is not required. Buyers who need reflective tape for vehicle traffic or outdoor roadway use should look at a different product.
Vinyl roll for clean, dry surfaces
The tape adheres directly to prepared concrete, epoxy or similar flooring without additional fasteners. It frees up installation time compared with painted lines and requires a clean, dry substrate for proper bonding.
Highlights
- Glow-in-the-dark visibility for low-light areas
- Retroreflective-free design avoids glare on reflective surfaces
- Durable 50 mil vinyl resists heavy floor traffic
- Continuous 100 ft roll covers long aisles
- Centre line guides straight, consistent application
Specifications
| Brand | MIGHTY LINE |
|---|---|
| Width | 4" |
Questions about this item
What surface preparation is required before applying the 50 mil vinyl tape?
Clean the floor thoroughly so it is dry and free of dust, oil, or loose paint before unrolling the 4 in wide tape.
Can the tape be applied over existing floor markings without removing them first?
Remove old markings or ensure they are completely flat and bonded; the 50 mil thickness will not hide ridges or peeling edges underneath.
How can I verify the glow-in-the-dark center line is charging properly after installation?
Expose the tape to bright light for several minutes, then darken the area; the center stripe should emit a visible glow along the full 100 ft roll.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



