We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue shielded Cat6A Ethernet cable, 100 ft, RJ45 connectors with gold contacts, snagless boots

Micro Connectors

Micro Connectors Cat6A STP 24AWG 100 ft Blue network ethernet cable

SKU CH-FGRG-EXVPW

Shielded Cat6A patch cable with gold-plated RJ45 connectors supports 10 Gbps over 100 ft

  • Cat6A
  • Length100 ft.
  • ColorBlue
  • ShieldedYes
  • Supports 10 Gigabit speeds up to 100 metres
  • Shielded foil reduces noise interference for reliable data
  • Gold-plated RJ45 contacts resist corrosion and signal loss
  • Snagless boot protects locking tab during frequent use
  • 600 MHz bandwidth handles high-throughput Gigabit Ethernet

High-Performance Cat6A Shielded Cable

This 100 ft Cat6A shielded patch cable connects computers to routers, switches and patch panels. The STP construction with foil shielding reduces noise interference for reliable data transmission. RJ45 plugs feature 50-micron gold-plated contacts that resist corrosion and maintain signal clarity. The cable is rated for 10 Gigabit speeds up to 100 meters with 600 MHz bandwidth.

Suited for Wired 10 Gigabit Links

Installers running 10 Gigabit Ethernet over copper will meet the distance requirement with this shielded 24 AWG cable. Pure copper conductors and UL/ETL verification support permanent infrastructure runs. Builders who need unshielded patch cords or shorter pre-made lengths for simple desktop connections should look at something else.

600 MHz Bandwidth Rating

The certified 600 MHz bandwidth is the single specification that confirms the cable can carry 10 Gigabit Ethernet traffic at the full 100 metre channel limit. If your network design only requires 1 Gigabit speeds or shorter runs, a lower-category cable would also function.

Highlights

  • Supports 10 Gigabit speeds up to 100 metres
  • Shielded foil reduces noise interference for reliable data
  • Gold-plated RJ45 contacts resist corrosion and signal loss
  • Snagless boot protects locking tab during frequent use
  • 600 MHz bandwidth handles high-throughput Gigabit Ethernet

Specifications

Cat6A
Length100 ft.
ColorBlue
ShieldedYes

Questions about this item

How do I install this 100 ft Cat6A STP cable and what step do people often miss?

Route the 100 ft shielded cable, press each RJ45 plug until the snagless boot clicks, then verify the link negotiates at 10 Gigabit; the step often missed is bonding the shield drain wire at both ends.

What maintenance or replacement will this Cat6A 24 AWG cable need later?

The 50-micron gold contacts resist corrosion, so no routine cleaning is required; replace the cable only if the snagless boot tears or the foil shield is kinked beyond repair.

What limit appears first on this shielded Cat6A patch cable under sustained 10 Gigabit loads?

The 600 MHz bandwidth ceiling and 100-meter channel limit govern sustained throughput; beyond that distance or frequency the link drops to lower speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.