We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Micro Connectors

Micro Connectors CAT6 Plenum Solid Bulk Cable 1000 ft 23 AWG Blue

SKU CH-4VR9-DRJ37

Plenum-rated CAT6 bulk cable with solid 23 AWG copper conductors for 1000 ft in-wall runs up to 600 MHz bandwidth

  • Length1000 ft.
  • ColorBlue
  • Plenum CMP-rated jacket reduces fire toxicity
  • 1000 ft reel enables custom in-wall runs
  • Solid 23 AWG copper conductors ensure signal integrity
  • Certified 600 MHz bandwidth supports Gigabit Ethernet
  • 100% pure copper meets EIA/TIA, UL and ETL standards

CAT6 Plenum Cable for Custom Runs

This plenum-rated CAT6 bulk cable is built for installers and IT professionals who need to create custom-length horizontal network runs inside walls or ceilings. It uses solid 23 AWG bare copper conductors and meets CMP fire-safety requirements for plenum spaces.

600 MHz Bandwidth and Gigabit Support

The cable is certified for Gigabit Ethernet with a tested bandwidth of up to 600 MHz, using pure copper wires that comply with EIA/TIA standards verified by UL and ETL. Its solid conductor design suits fixed infrastructure rather than patch cords.

Verify Plenum Requirements and Pull Length

Before ordering, confirm that your local building code requires CMP-rated cable for the intended air-handling spaces. The 1000-foot reel and 5.3 mm outer diameter determine pull tension and conduit fill, so plan the route accordingly.

Highlights

  • Plenum CMP-rated jacket reduces fire toxicity
  • 1000 ft reel enables custom in-wall runs
  • Solid 23 AWG copper conductors ensure signal integrity
  • Certified 600 MHz bandwidth supports Gigabit Ethernet
  • 100% pure copper meets EIA/TIA, UL and ETL standards

Specifications

Length1000 ft.
ColorBlue

Questions about this item

Should I pick solid or stranded conductor for a 1000 ft in-wall run?

This reel uses 23 AWG solid bare copper, which is the correct choice for permanent horizontal runs because solid conductors keep attenuation low over the full 1000 ft length.

What does the 600 MHz bandwidth actually deliver at the wall jack?

The 600 MHz rating supports certified Gigabit Ethernet performance across the full 100 m channel, so each 1000 ft pull stays within spec for 1 Gbps links.

Is the CMP-rated jacket recognised by the same standard that caps channel length?

The CMP plenum jacket meets UL and ETL requirements under the EIA/TIA standard that also defines the 100 m maximum channel distance for Cat6.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.