We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white C13 to C14 power cords coiled together

Micro Connectors

Micro Connectors 6 ft C13 to C14 18AWG 10A 250V White 2-Pack

SKU CH-XK9Z-RH06B

Two 6-foot C13-to-C14 extension cords rated 10 A at 250 V with 18 AWG conductors

  • UL approved for safety assurance
  • 6 ft length extends reach to distant outlets
  • C13 to C14 connectors fit standard IEC devices
  • 18AWG conductors rated 10A at 250V
  • Fully molded design adds durability for long life

Extension cord for monitors and peripherals

This two-pack of 6-foot power extension cords connects a C14 male plug to a C13 female socket. They suit desktop computers, monitors, printers, scanners and other devices that use the standard three-pin shroud connector. Each cord carries a 10 A, 250 V rating for typical office equipment. The white jacket keeps cable runs visible and tidy.

UL-approved 18AWG conductors with molded ends

The cords use 18AWG copper conductors and are UL approved for safety. Fully molded strain relief on both the IEC-60320-C14 and IEC-320 C13 ends protects the internal wiring from bending stress. The female C13 plugs directly into the device inlet while the male C14 plugs into an existing power cable or PDU strip. This construction resists accidental unplugging during routine desk adjustments.

Passive design runs cool and silent

As passive copper assemblies the cords generate no heat of their own and operate silently. Power draw is determined entirely by the connected load up to the rated 10 A at 250 V. The 18AWG gauge keeps voltage drop low over the 6-foot length for stable operation of attached hardware. No fan, firmware or active components are present to fail or produce noise.

Highlights

  • UL approved for safety assurance
  • 6 ft length extends reach to distant outlets
  • C13 to C14 connectors fit standard IEC devices
  • 18AWG conductors rated 10A at 250V
  • Fully molded design adds durability for long life

Specifications

No published specifications for this item yet.

Questions about this item

What does the IEC 60320 C13 to C14 connection support in practice?

The cord carries up to 10 A at 250 V using 18 AWG conductors, suitable for monitors, printers and similar peripherals.

What clearance does the fully moulded C13 and C14 ends need?

Each connector adds roughly 5 cm of rigid moulding beyond the cable, so allow that depth behind the device or power strip.

How do I fit the two cords without creating a loose link?

Push each C13 socket firmly onto the device inlet until it clicks, then seat the C14 plug fully into the existing cable or outlet; a partial seat is the common mistake.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.