We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Micro Connectors

Micro Connectors 5 ft Cat6A Ultra Slim 28AWG Green 5-Pack network ethernet cable

SKU CH-6950-1XYAW

Five-foot Cat6A ultra-slim cables with 4.6 mm diameter, 28 AWG copper, 500 MHz bandwidth and 10 Gbps speed, green, pack of five

  • Length5 ft.
  • ColorGreen
  • Ultra-slim 4.6 mm diameter saves rack space
  • 28 AWG pure copper handles 10 Gbps speeds
  • 500 MHz bandwidth supports PoE and VoIP
  • Snag-less moulded boots protect latch and bend radius
  • 50 µ" gold contacts ensure reliable universal connectivity

Ultra-Slim Cat6A Patch Cables

These five green cables measure 5 ft each and use a 28 AWG construction with an outer diameter of 4.6 mm. They are rated for Cat6A performance with bandwidth up to 500 MHz and data rates up to 10 Gbps. The UL-listed design features snagless molded boots and 50 µin gold-plated contacts for reliable connections.

Suited for Dense Racks and PoE Gear

The ultra-slim profile saves space and improves airflow in crowded cabinets, making them ideal for patch panels, switches and PoE or VoIP devices where density matters. Buyers who need heavier-gauge conductors for longer permanent runs or outdoor-rated jackets should look at other cable types.

Verify Port Clearance and Length Needs

Confirm that the 5 ft reach matches the distance between your devices and the patch panel or switch. The 4.6 mm diameter fits tight port spacing, but check that adjacent connectors do not block the snagless latch. Ensure your equipment supports Cat6A speeds to use the full 500 MHz bandwidth.

Highlights

  • Ultra-slim 4.6 mm diameter saves rack space
  • 28 AWG pure copper handles 10 Gbps speeds
  • 500 MHz bandwidth supports PoE and VoIP
  • Snag-less moulded boots protect latch and bend radius
  • 50 µ" gold contacts ensure reliable universal connectivity

Specifications

Length5 ft.
ColorGreen

Questions about this item

What type of network port do I need on my devices to use these Cat6A 28AWG cables?

Each cable terminates in standard RJ45 connectors, so any device with a Gigabit or 10 Gigabit Ethernet port — PCs, servers, routers, switches, NAS units, VoIP phones or PoE gear — will accept them directly.

Will these ultra-slim 4.6 mm cables work reliably with my older Cat5e patch panel and 1 Gbps switch?

Yes. The Cat6A rating and 500 MHz bandwidth are fully backward compatible, so they will link at the highest speed both ends support — up to 1 Gbps on your existing gear — while the 28 AWG conductors and gold-plated contacts maintain signal integrity.

How can I verify the 5-pack is delivering the rated 10 Gbps performance after installation?

Run a throughput test between two 10 Gbps-capable endpoints (such as a 10 GbE NIC and a 10 GbE switch port) using iperf3 or a similar tool; sustained results near 9–10 Gbps confirm the cables, connectors and termination are all performing to spec.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.