We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black low-profile angled power extension cords, flat 45-degree plugs, three-foot length

Micro Connectors

Micro Connectors 3ft Low Profile Angled Power Extension Cord 16AWG 2-Pack

SKU CH-G40H-YQHVK

A two-pack of 16 AWG extension cords with 45° angled flat plugs rated 13 A, 125 V and 1625 W for indoor appliances

  • Angled 45° plug fits behind furniture without blocking adjacent outlets
  • Low-profile NEMA 5-15P design saves space in tight indoor areas
  • 16 AWG SJT conductors rated 13A at 125V for up to 1625W loads
  • Fully moulded construction with VW-1 and FT-2 105°C temperature rating
  • UL and cUL listed, materials compliant with RoHS and REACH directives

Low-Profile Angled Extension

This two-pack adds three feet of reach to any standard North American power cord. Each cord uses a flat NEMA 5-15P plug set at a 45° angle so it sits flush against the wall and leaves the neighbouring outlet free. The 16 AWG SJT conductors are fully moulded for durability and rated for 13 A at 125 V, delivering up to 1625 W. UL and cUL listings plus VW-1 and FT-2 105 °C ratings confirm compliance for indoor use.

Build Integration

The low-profile plug fits behind desks, entertainment units or server racks where a straight connector would foul the furniture or block the second socket. Because the receptacle end is a regular NEMA 5-15R, it accepts any device with a standard C13 or 5-15P cord — computers, monitors, printers or AV gear — without adapters. The 16 AWG gauge keeps voltage drop negligible over the short run, so high-draw equipment stays within spec. RoHS and REACH compliance means the materials meet current restricted-substance rules.

Buyer Fit

Home-office users and installers who need extra length in tight corners will appreciate the space-saving angle and moulded strain relief. Buyers who want more storage for cable runs or require a locking connector should look at something else, as does anyone needing an outdoor-rated or higher-amperage feed.

Highlights

  • Angled 45° plug fits behind furniture without blocking adjacent outlets
  • Low-profile NEMA 5-15P design saves space in tight indoor areas
  • 16 AWG SJT conductors rated 13A at 125V for up to 1625W loads
  • Fully moulded construction with VW-1 and FT-2 105°C temperature rating
  • UL and cUL listed, materials compliant with RoHS and REACH directives

Specifications

No published specifications for this item yet.

Questions about this item

Will the 16 AWG cord handle continuous 13 A loads without overheating?

It is rated 13 A / 125 V (1625 W) with VW-1 and FT-2 105 °C (221 °F) temperature ratings, so sustained operation at the rated current stays within the certified thermal limits.

Does the low-profile 45° plug run hotter or draw more power than a straight plug?

The angled NEMA 5-15P is fully moulded and carries the same 13 A / 125 V rating; it adds no extra resistance or heat compared with a straight connector.

What outlet and device plugs are needed to use this extension?

You need a standard NEMA 5-15R wall outlet and a device with a NEMA 5-15P plug; the cord provides a NEMA 5-15R female end to accept the device plug.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.