We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre cable with LC connectors, 1 metre length

Micro Connectors

Micro Connectors 1m 10Gb LC/LC OM4 50/125 Duplex Multimode Fibre Optic Cable

SKU CH-KQCY-79N5C

Duplex OM4 multimode cable with LC/LC connectors supports 10 Gb up to 550 m and 40/100 Gb up to 150 m, UPC polish, 2.0 mm OFNR riser jacket

  • 10 Gb up to 550 m with OM4 bandwidth
  • 40 Gb and 100 Gb up to 150 m supported
  • 4700 MHz·km EMB at 850 nm for high throughput
  • OFNR riser jacket rated for vertical building runs
  • Low-profile LC connectors enable high-density patching

1m OM4 Duplex Fibre Cable

This one-metre OM4 duplex multimode fibre cable uses LC/LC connectors and a 50/125 micron core for high-throughput network links. It is rated for 10 Gb up to 550 metres and supports 40 Gb and 100 Gb up to 150 metres. The aqua OFNR riser jacket suits vertical runs between floors. Backward compatibility covers existing LED-based 50/125 multimode installations.

Suited For Dense Patch Panels

The small-form LC connectors fit high-density patch panels and transceivers where space is tight. UPC polish and return loss greater than 35 dB help maintain signal integrity on short links. Buyers needing single-mode fibre, longer unrepeatered distances, or a different connector type such as SC or MPO should look elsewhere.

Consistent Loss On Long Runs

Effective modal bandwidth of 4700 MHz/km at 850 nm keeps modal dispersion low during sustained 10 Gb, 40 Gb or 100 Gb throughput. The 2.0 mm OFNR jacket protects the two fibres in riser pathways without degrading insertion loss over time. Performance remains stable across the full rated distance rather than only in brief bursts.

Highlights

  • 10 Gb up to 550 m with OM4 bandwidth
  • 40 Gb and 100 Gb up to 150 m supported
  • 4700 MHz·km EMB at 850 nm for high throughput
  • OFNR riser jacket rated for vertical building runs
  • Low-profile LC connectors enable high-density patching

Specifications

No published specifications for this item yet.

Questions about this item

What equipment needs LC ports to connect this OM4 duplex cable?

Any switch, server NIC, transceiver or patch panel fitted with LC duplex ports will accept the LC/LC connectors on this 50/125 µm multimode cable.

Will the aqua-jacketed OFNR cable work with my existing OM3 or OM2 50/125 µm links?

Yes — the OM4 cable is backward compatible with LED-based 50/125 µm multimode applications, so it can replace OM3 or OM2 jumpers in the same pathways.

How can I verify the link is performing to the 4700 MHz·km EMB spec after installation?

Use a fibre certifier or OTDR at 850 nm; the measured insertion loss should meet the >35 dB return-loss figure and support 10 Gb up to 550 m or 40 Gb/100 Gb up to 150 m.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.