We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 18-inch SAS SFF-8482 to SATA cable with Molex LP4 power connector

Micro Connectors

Micro Connectors 18 Inches SAS SFF-8482 to SATA with Molex LP4 Power Cable Red

SKU CH-NWY1-YYG3W

An 18-inch red cable connects a SAS SFF-8482 drive to a SATA port while drawing power from a Molex LP4 connector

  • ColorRed
  • SATA III 6 Gb/s throughput for fast data transfer
  • 18-inch length fits standard chassis layouts
  • 7-pin SATA data segment keeps cable ultra-thin and flexible
  • 15-pin SATA to 4-pin LP4 adapter powers drives from Molex supply
  • SFF-8482 SAS connector mates with enterprise backplanes

SAS SFF-8482 to SATA with Molex Power

This 18-inch red cable combines SATA data and power connections for drives using the SAS SFF-8482 interface. The data segment uses a 7-pin SATA architecture to keep the cable thin and flexible. A 15-pin SATA to 4-pin LP4 adapter is included to supply power to the drive. It is compliant with SATA III 6Gb specifications.

Suits SAS drives needing SATA host connection

This cable suits builders connecting a SAS drive with an SFF-8482 port to a SATA controller or motherboard header while drawing power from a Molex LP4 source. It is not for drives that use a standard SATA data connector, nor for installations requiring a different SAS plug type or a pure SATA power input without the Molex adapter.

SFF-8482 interface requirement

The single specification that decides fit is the drive connector: the drive must present an SFF-8482 SAS port. If the drive uses a different SAS connector or a native SATA port, this cable will not mate. The 18-inch length and red colour are fixed attributes of this assembly.

Highlights

  • SATA III 6 Gb/s throughput for fast data transfer
  • 18-inch length fits standard chassis layouts
  • 7-pin SATA data segment keeps cable ultra-thin and flexible
  • 15-pin SATA to 4-pin LP4 adapter powers drives from Molex supply
  • SFF-8482 SAS connector mates with enterprise backplanes

Specifications

ColorRed

Questions about this item

Which length of this SAS SFF-8482 to SATA cable should I pick?

The cable is supplied in a single 18-inch length that combines a SATA 7+15 pin connector, a 4-pin Molex LP4 power tail and a 7-pin SATA data plug.

What does the SATA III 6Gb label mean once the cable is installed?

It confirms the data path meets the SATA III specification so a connected drive can run at up to 6 Gb/s, limited by the drive and controller.

How does the SFF-8482 interface affect what drives I can connect?

The SFF-8482 end accepts SAS or SATA drives while the opposite end provides a standard SATA 7-pin data connection plus Molex LP4 power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.