Micro Connectors
Micro Connectors 14 ft Cat6A UTP Ethernet Patch Cable Blue 5-Pack
Five 14 ft Cat6A UTP cables rated for 10 Gbps at 550 MHz with 24 AWG copper and gold-plated RJ45 plugs
- Length14 ft.
- ColorBlue
- 10 Gbps speed for demanding networks
- 550 MHz bandwidth supports high‑speed data transfer
- 100 % pure copper conductors with 50‑micron gold contacts
- Snagless boots simplify moves and changes
- Backward compatible with Cat5, Cat5e and Cat6 systems
Five-pack Cat6A patch cables
This five-pack supplies five 14-foot Cat6A UTP patch cables in blue, each built with 24 AWG pure copper conductors and 50-micron gold-plated RJ45 plugs. The cables are rated for 10 Gbps at 550 MHz and carry UL/cUL listing with RoHS compliance. Snagless boots protect the latch during frequent moves, adds and changes.
Verify connector spacing and routing
Confirm that your rack, patch panel or wall outlets accept standard RJ45 plugs with snagless boots and that a 14-foot run reaches between devices without excess slack. The T568B wiring matches most existing installations, but check your current patch leads to ensure consistent pin-out across the link. No special tools are required beyond a basic cable tester if you validate each drop.
Replaces Cat5e or Cat6 jumpers
These cables upgrade older Cat5e or Cat6 patch leads when 10 Gbps throughput or 550 MHz bandwidth is needed for server uplinks, cloud storage access or high-definition streaming. The jump is worthwhile when existing cabling limits link speed or when future-proofing new drops; it is not for buyers who need longer runs than 14 feet or who require shielded construction for noisy environments.
Highlights
- 10 Gbps speed for demanding networks
- 550 MHz bandwidth supports high‑speed data transfer
- 100 % pure copper conductors with 50‑micron gold contacts
- Snagless boots simplify moves and changes
- Backward compatible with Cat5, Cat5e and Cat6 systems
Specifications
| Length | 14 ft. |
|---|---|
| Color | Blue |
Questions about this item
Does the 5-pack include any tools or wall plates, or just the five 14 ft cables?
The pack contains five 14 ft Cat6A UTP patch cables with snagless boots and 50 micron gold-plated RJ45 plugs. No tools, wall plates or extra hardware are included.
Should I choose the 14 ft length or one of the other listed lengths for a typical desk-to-switch run?
Available lengths are 1 ft, 3 ft, 7 ft, 10 ft, 14 ft, 25 ft, 50 ft and 100 ft. Pick the shortest length that reaches your device with a little slack; 14 ft suits many desk-to-switch or patch-panel runs.
Will the 550 MHz / 10 Gbps rating actually deliver 10 Gbps on my existing Cat6 patch panel?
The cable meets Cat6A performance (550 MHz, up to 10 Gbps) and is backward compatible with Cat5e and Cat6 links. You will get 10 Gbps only if the switch, NIC and entire channel also support 10 Gbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
