We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber cable with LC and SC connectors, 10m length

Micro Connectors

Micro Connectors 10m LC/SC OM3 Duplex 50/125 Aqua fibre optic cable

SKU CH-DCKY-13DSP

10 m aqua OM3 duplex patch cable with LC/SC connectors, rated for 10 Gb at 300 m and 40/100 Gb at 100 m, OFNR riser jacket

  • TypeFiber
  • ColorAqua
  • Connector Number2
  • Supports 10/40/100 Gb Ethernet speeds up to 300 m
  • OM3 50/125 µm fiber with 2000 MHz·km bandwidth at 850 nm
  • OFNR riser rating allows vertical runs between building floors
  • Low-bend-loss design simplifies dense data-centre cabling
  • LC/SC duplex connectors suit high-density patch panels

10m OM3 Duplex Fiber Cable

This 10-metre OM3 multi-mode duplex cable uses 50/125 micron fiber with LC and SC connectors. It is built for 10Gb Ethernet links up to 300 metres and 40Gb or 100Gb links up to 100 metres. The aqua jacket identifies the OM3 rating and the OFNR riser rating allows installation in vertical shafts between floors. It suits data-centre, enterprise and telecom patching where high-density connectivity is required.

Ideal for High-Density 10G to 100G Patching

Network engineers running 10G SR, 10G LRM or SFP+ transceivers at 10G, 40G or 100G will find the cable matches the preferred OM3 specification. The reduced bend attenuation eases routing in crowded racks and server farms. Buyers who need single-mode fiber, longer single-mode reach, or a different connector mix such as LC/LC or MPO should look at other cable types.

Sustained Multi-Gigabit Throughput

The 2000 MHz/km effective modal bandwidth at 850nm supports continuous 10G, 40G and 100G transmission without the modal dispersion that limits lower-grade fiber. Backward compatibility with LED-based 50/125 multi-mode gear protects existing infrastructure investment. The riser-rated jacket maintains performance when cables are pulled through building pathways and bent around cable-management trays.

Highlights

  • Supports 10/40/100 Gb Ethernet speeds up to 300 m
  • OM3 50/125 µm fiber with 2000 MHz·km bandwidth at 850 nm
  • OFNR riser rating allows vertical runs between building floors
  • Low-bend-loss design simplifies dense data-centre cabling
  • LC/SC duplex connectors suit high-density patch panels

Specifications

TypeFiber
ColorAqua
Connector Number2

Questions about this item

What equipment do I need to connect this 10 metre LC/SC OM3 duplex cable?

You need transceivers or patch panels with LC and SC ports that accept 50/125 µm multi-mode fibre.

Can I mix this OM3 cable with older OM1 or OM2 links in the same run?

It is backward compatible with LED-based 50/125 multi-mode applications, so it works alongside legacy OM1/OM2 segments.

How can I verify the link is performing at the rated 10 Gb, 40 Gb or 100 Gb speeds?

Check the transceiver diagnostics for a clean eye diagram and low bit-error rate; the cable supports 10 Gb up to 300 m and 40/100 Gb up to 100 m.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.