We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black power extension cord with a flat 45-degree angled three-prong plug and a straight three-hole socket, 1 foot long

Micro Connectors

Micro Connectors 1 ft Low Profile Angled Power Cord Extension 16 AWG 13A 125V

SKU CH-207E-HWT4T

A low-profile 45° angled power-cord extension rated 13 A at 125 V with 16 AWG conductors

  • Extends power reach in tight spaces with 1 ft low-profile angled cord
  • 45° flat plug avoids blocking adjacent outlets on crowded power strips
  • 16 AWG SJT conductors rated 13 A / 125 V for 1625 W loads
  • UL and cUL listed with VW-1 and FT-2 105 °C temperature rating
  • RoHS and REACH compliant materials for safer indoor use

Tight-Space Power Extension

This 1 ft cord adds reach to an existing power cable with a flat 45° angled NEMA 5-15P plug that keeps adjacent outlets free. The low-profile design suits indoor setups where standard plugs would block neighbouring sockets. It connects computers, monitors, printers or other 125 V equipment without adding bulk.

Build Integration

The male NEMA 5-15P end inserts into a wall outlet or power strip while the female NEMA 5-15R accepts the device cord, requiring no tools or adapters. Fully moulded SJT 16 AWG conductors handle the connection securely and the VW-1 and FT-2 105°C ratings confirm the jacket withstands elevated temperatures. UL and cUL listings plus RoHS and REACH compliance cover the safety and material requirements for indoor use.

Capacity And Headroom

Rated at 13 A and 125 V, the cord delivers up to 1625 W, sufficient for typical desktop systems, displays and office peripherals. The 16 AWG gauge limits use to loads within this rating; higher-draw appliances such as heaters or large laser printers would exceed the specification. The one-foot length provides just enough slack for tight routing but cannot span longer distances.

Highlights

  • Extends power reach in tight spaces with 1 ft low-profile angled cord
  • 45° flat plug avoids blocking adjacent outlets on crowded power strips
  • 16 AWG SJT conductors rated 13 A / 125 V for 1625 W loads
  • UL and cUL listed with VW-1 and FT-2 105 °C temperature rating
  • RoHS and REACH compliant materials for safer indoor use

Specifications

No published specifications for this item yet.

Questions about this item

How long can the 16 AWG conductors safely carry 13 A before heat becomes the limiting factor?

The cord is rated for continuous 13 A at 125 V, and its VW-1 and FT-2 insulation is tested to 105 °C (221 °F), so the thermal limit is reached only if ambient temperature or bundling pushes the jacket above that level.

Does the flat angled plug run warm or make noise when left plugged in all day?

The fully moulded SJT 16 AWG construction has no moving parts or electronics, so it operates silently and stays at ambient temperature as long as the load stays within the 13 A / 1625 W rating.

What type of outlet and device plug are required to use this extension?

You need a standard NEMA 5-15R wall receptacle and a device with a NEMA 5-15P plug; the cord provides a low-profile 45° NEMA 5-15P on one end and a matching NEMA 5-15R on the other.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.