We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black RJ45 splitter with two female ports and metal shielding

Mickey Technology

Mickey Technology RJ45 Splitter Adapter 1 to 2 Female Cat5-7

SKU CH-DF2K-QDZFP

Splits one Ethernet cable into two RJ45 ports for Cat5 to Cat7, each limited to 100 megabytes and not simultaneous, with shielded metal housing measuring 4cm x 3.5cm x 2.1cm

  • FeaturesInput and output interface: RJ45 eight-core standard jack. T
  • Splits one Ethernet cable into two separate ports
  • Each port delivers up to 100 megabytes per second
  • Metal shielding blocks electromagnetic interference for stable signals
  • Compact 4cm by 3.5cm by 2.1cm design fits tight spaces
  • Works with Cat5, Cat5e, Cat6 and Cat7 network cables

Network Splitter Adapter

This RJ45 splitter divides one Ethernet cable into two female ports for Cat5 through Cat7 cables. It lets you alternate between two devices without unplugging the original run. The metal-shielded housing reduces electromagnetic interference during signal transmission.

Use Case and Limitation

Suitable for setups where only one device needs an active connection at a time, such as switching a single wall port between a PC and a smart TV. Not for users who need simultaneous internet access on both ports or gigabit speeds on either link.

Speed Constraint

Each output is limited to 100 megabytes per second because the eight pins are split into two four-pin groups. This physical wiring decision determines whether the adapter matches the required throughput.

Highlights

  • Splits one Ethernet cable into two separate ports
  • Each port delivers up to 100 megabytes per second
  • Metal shielding blocks electromagnetic interference for stable signals
  • Compact 4cm by 3.5cm by 2.1cm design fits tight spaces
  • Works with Cat5, Cat5e, Cat6 and Cat7 network cables

Specifications

FeaturesInput and output interface: RJ45 eight-core standard jack. The adapter splits the original embedded Ethernet cable (8 pins) into two groups. It is convenient to use different computers in turns.
RJ45 Ethernet splitter can divide a network cable into two outputs, The speed of each cable group (1 and 2) can only reach 100 megabytes. And the signal transmission of two cable groups will not interfere with each other.
By using this newly upgraded version of the dual RJ45 adapter, it is possible to interconnect two devices. But does not support two computers accessing the Internet at the s

Questions about this item

Will the RJ45 eight-core jack or internal PCB need replacement after extended use?

The built-in thick PCB motherboard is designed for durable signal transmission security, and the metal shield protects against electromagnetic disturbance, so no scheduled maintenance or replacement of the jack or board is required.

What throughput ceiling appears first when the splitter runs continuously?

Each of the two output groups is limited to 100 megabytes per second, and the adapter does not support both ports operating simultaneously, so that 100 MB/s per group is the sustained-use limit.

How much heat or noise does the adapter produce when powered all day?

The passive design has no fan or active components, so it generates no audible noise and negligible heat during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.