We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA IDE USB adapter with short cable and power supply

METRA AX-S100A SATA / IDE to USB 3.2 Gen1 Type-C adapter with 1.8 in cable and 12V 2A power

SKU CH-4DCR-SY5VN

Connects 2.5" and 3.5" SATA or IDE drives to a USB 3.2 Gen1 Type-C port at up to 5 Gbps with a 1.8 in cable and 12V 2A power adapter

  • TypeSATA
  • ColorRed
  • Length< 1"
  • Cable Length1.8 in.
  • Connector Number1
  • SpecificationsY-3322C, 5 gigabits_per_second, usb3.0_c, ide, 3.5 inches, l
  • Connect SATA or IDE drives externally via USB 3.2 Gen1 Type-C
  • One-Touch Backup copies data with a single button press
  • Hot-swappable design lets you change drives without rebooting
  • 12 V 2 A power adapter supports 2.5 in and 3.5 in drives
  • 8 in cable with reversible Type-C plug simplifies connections

Universal Drive Bridge

The METRA AX-S100A connects 2.5 and 3.5 inch SATA or IDE hard drives and optical drives to a host computer through a USB 3.2 Gen1 Type-C port. It accepts one IDE and one SATA device at the same time, but cannot run two IDE drives together. The adapter is powered by an included 12 V 2 A supply and features an on-off switch for drive protection.

USB 3.2 Gen1 Ceiling

The interface tops out at 5 Gbps and falls back to USB 2.0 at 480 Mbps or USB 1.1 at 12 Mbps when connected to older ports. Actual throughput depends on the attached drive’s own speed, so mechanical disks will saturate well below the link maximum. The Type-C plug is reversible, but the cable is only 1.8 in long, so the adapter sits close to the host.

Capacity and Headroom

The bridge handles 2.5 and 3.5 inch SATA or IDE hard disks and optical drives of any capacity the drive itself supports. One-Touch Backup works on Windows only; Linux and Mac OS cannot trigger the function. Win 10 and Mac OS also do not support DVD drives through this adapter, so optical media workflows on those systems are not possible.

Highlights

  • Connect SATA or IDE drives externally via USB 3.2 Gen1 Type-C
  • One-Touch Backup copies data with a single button press
  • Hot-swappable design lets you change drives without rebooting
  • 12 V 2 A power adapter supports 2.5 in and 3.5 in drives
  • 8 in cable with reversible Type-C plug simplifies connections

Specifications

BrandMETRA
ModelAX-S100A
TypeSATA
ColorRed
Length< 1"
Cable Length1.8 in.
Connector Number1
SpecificationsY-3322C, 5 gigabits_per_second, usb3.0_c, ide, 3.5 inches, lead, Laptop, 1
Refresh Rate5 gigabits_per_second
FeaturesY-3322C, usb3.0_c, ide, 5 gigabits_per_second, Laptop

Questions about this item

Which adapter version should I pick for a 3.5 inch IDE drive and a 2.5 inch SATA SSD?

The AX-S100A supports one IDE and one SATA drive simultaneously, covering 2.5 and 3.5 inch form factors with the included 12V 2A power supply.

What does the 5 Gbps headline speed mean when I copy files to a mechanical hard drive?

5 Gbps is the USB 3.2 Gen1 interface ceiling; real-world throughput will be limited by the drive’s own read and write performance.

Does the USB-C connector use USB 3.2 Gen1 or an older standard?

It uses USB 3.2 Gen1 Type-C, delivering up to 5 Gbps and backward compatible with USB 2.0 at 480 Mbps and USB 1.1 at 12 Mbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.