Metra 100-inch Extendable Microfiber Duster Kit Blue
A 100-inch extendable microfiber duster kit with bendable heads for high ceilings and tight gaps
- Height16 L x 2 W x 0.1 H inches
- Width2 inches
- Length16 inches
- Weight0.417 kilograms
- Reaches high ceilings without a ladder thanks to 100" extension
- Bendable microfiber head traps dust at any angle with 360° flexibility
- Lightweight 0.417 kg pole reduces arm fatigue during long cleaning sessions
- Washable heads detach easily for quick rinsing and reuse
- Ergonomic non-slip grip ensures comfortable control at full length
Extendable Microfiber Duster Kit
The Metra kit provides a telescoping pole that reaches up to 100 inches for high ceilings and ceiling fans. Two interchangeable microfiber heads handle flat surfaces and tight gaps around the home. The lightweight design weighs only 0.417 kilograms for easy manoeuvring.
Thermals Noise and Power Draw
No electricity or batteries are required so the tool produces no heat, noise or power consumption during use. The manual operation keeps running costs at zero and eliminates motor whine. Maintenance is limited to rinsing the microfiber heads when they become soiled.
Build Quality and Connectors
The pole extends to 16 inches when collapsed and locks securely at the chosen length. An ergonomic plastic grip at the handle end prevents slipping during overhead work. Heads attach and detach quickly for washing in warm water before air drying.
Highlights
- Reaches high ceilings without a ladder thanks to 100" extension
- Bendable microfiber head traps dust at any angle with 360° flexibility
- Lightweight 0.417 kg pole reduces arm fatigue during long cleaning sessions
- Washable heads detach easily for quick rinsing and reuse
- Ergonomic non-slip grip ensures comfortable control at full length
Specifications
| Brand | Metra |
|---|---|
| Height | 16 L x 2 W x 0.1 H inches |
| Width | 2 inches |
| Length | 16 inches |
| Weight | 0.417 kilograms |
Questions about this item
How do I lock the extension pole at the 100-inch length?
Pull the telescoping sections out until the pole reaches 100 inches; each section clicks into place when fully seated, so check every joint before climbing a ladder.
When should I wash or replace the microfiber heads?
Remove either head and wash with warm water when dust no longer releases easily; air-dry until fluffy, then snap back onto the pole.
How much weight can the bendable head support before it stops springing back flat?
The 360° bendable head returns to flat after light dusting pressure; heavy, wet debris or forcing it past its natural flex will permanently deform the microfiber fingers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



